3236 Scott Boulevard, Santa Clara, California 95054

Phone: (408) 986-5060

Fax: (408) 986-5095

CHP0230-PM

Product Specifications - July 2002

(4 of 4)

Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the

suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating

parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Celeritek does not convey any license under its patent

rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body,

or other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal

injury or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out

of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent

regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer.

TM

Ordering Information

The CHP0230-PM is available in a surface mount 50 ohm matched module and devices are available in tube or tape and reel.

Part Number for Ordering

Package

CHP0230-PM-0000

PM6 surface mount power package in tube

CHP0230-PM-000T

PM6 surface mount power package in tape and reel

PB-CHP0230-PM

Evaluation Board with SMA connectors for CHP0230-PM

Physical Dimensions

Recommended Application Circuit

Note: This schematic represents the topology of the application cir-

cuit recommended by Celeritek.

Evaluation Board Schematic

Board substrate:

ER = 4.60

Thickness = 0.031 in.

RF OUT

50

Ω

Vcc

N/C

Vref

RF IN

CHP0230-PM

50

Ω

220 pF

3.3 µF

10 µF

1

2

3

4

5

6

PCB Footprint (Minimum Pad Dimensions)

0.015 (0.38) DIA.

VIA HOLE X21

0.032 (0.80)

MIN. X6

0.240

(6.10)

0.060 (1.50) MIN.

0.295 (7.50)

0.100 (2.55)

0.054 (1.36) X4

DIMENSIONS IN INCHES (mm)

DRAWING NOT TO SCALE

0.015 (0.40)

RADIUS

X12

T1

T1 line is important to ensure best bypassing. Optimum performance

is achieved through an electrical length of 20°min. at 835 MHz.