H.261 datasheet(26/31 Pages) ETC1

Part #	H.261

Description	LINE TRANSMISSION OF NON-TELEPHONE SIGNALS

Download	31 Pages

Scroll/Zoom	100%

Manufacturer	ETC1 [List of Unclassifed Manufacturers]

Direct Link

Logo

26 / 31 page

Recommendation H.261

(03/93)

23

5.4.4

Relock time for error corrector framing

Three consecutive error correction framing sequences (24 bits) should be received before frame lock is deemed to have been

achieved. The decoder should be designed such that frame lock will be re-established within 34 000 bits after an error

corrector framing phase change.

NOTE – This assumes that the video data does not contain three correctly phased emulations of the error correction framing

sequence during the relocking period.

Similar Description - H.261

Manufacturer	Part #	Datasheet	Description
Unisonic Technologies	TEA1110A	249Kb / 9P	LOW VOLTAGE VERSATILE TELEPHONE TRANSMISSION TELEPHONE TRANSMISSION INTERFACE
Marki Microwave	NLTL-6273	1Mb / 15P	GaAs MMIC Non-Linear Transmission Line
	NLTL-6794SM	2Mb / 25P	GaAs MMIC Non-Linear Transmission Line
	NLTL-6273SM	1Mb / 14P	GaAs MMIC Non-Linear Transmission Line
	NLTL-6796SM	2Mb / 25P	GaAs MMIC Non-Linear Transmission Line
	NLTL-6275	1Mb / 14P	GaAs MMIC Non-Linear Transmission Line
Unisonic Technologies	TEA1062AN	334Kb / 14P	LOW VOLTAGE TELEPHONE TRANSMISSION CIRCUIT
Micro Electronics	MMC4066	146Kb / 4P	QUAD BILATERAL SWITCH FOR TRANSMISSION OR MULTIPLEXING OF ANALOG OR DIGITAL SIGNALS
STMicroelectronics	HCC4066B	266Kb / 11P	OR MULTIPLEXING OF ANALOG OR DIGITAL SIGNALS QUAD BILATERAL SWITCH FOR TRANSMISSION
STMicroelectronics	HCF4066B	684Kb / 10P	QUAD BILATERAL SWITCH FOR TRANSMISSION OR MULTIPLEXING OF ANALOG OR DIGITAL SIGNALS