Gain Equalizer Die

Page 4 of 4

Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled

to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

Performance Data

Data Table

Swept Graphs

Case Style

Die

Die Ordering and packaging

information

Quantity, Package

Model No.

Small, Gel - Pak: 5,10,50,100 KGD*

EQY-12-24-DG+

EQY-12-24-DP+

Refer to

AN-60-067

Environmental Ratings

ENV80

ESD Rating**

Human Body Model (HBM): Class 1C (Pass 1000V) in accordance with ANSI/ESD STM 5.1 - 2001

Additional Detailed Technical Information

additional information is available on our dash board.

** Tested in industry standard 2 x 2mm, 8-lead MCLP package

EQY-12-24-D+

*Known Good Die (KGD) means that the die are taken from PCM good wafer and then visually inspected per Mini-Circuits’ criteria. Though this is not

definitive, it does provide a higher degree of confidence that die are capable of meeting typical RF electrical parameters specified by Mini-Circuits.

Additional Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended

to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s

applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms

and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits

contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder,

please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

D. Mini-Circuits does not warrant the accuracy or completeness of the information, text, graphics and other items

contained within this document and same are provided as an accommodation and on an “As is” basis, with all faults.

E. Purchasers of this part are solely responsible for proper storing, handling, assembly and processing of Known

Good Dice (including, without limitation, proper ESD preventative measures, die preparation, die attach, wire bond

ing and related assembly and test activities), and Mini-Circuits assumes no responsibility therefor or for environmental

effects on Known Good Dice.

F. Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation d/b/a Mini-

Circuits. All other third-party trademarks are the property of their respective owners. A reference to any third-party

trademark does not constitute or imply any endorsement, affiliation, sponsorship, or recommendation by any such

third-party of Mini-Circuits or its products.