3236 Scott Boulevard
Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CMM1330
Features
t 40% Linear Power Added Efficiency
t 30 dBm Output Power (IS-136 TDMA)
t 30 dB Gain
t Low Cost, SO-8 Surface Mount Package
t Tested Under Digital Modulation
Applications
t IS-136 Handsets
t Wireless Local Loop Subscriber Units
t PCS Base Stations
Description
The CMM1330 is a 3V linear power amplifier
intended for use in PCS handsets, wireless local loop sub-
scriber units and PCS base stations. As a pin-compatible
member of the new Triniti DX™ amplifier family, the
CMM1330 offers maximum performance and flexibility. The
flexible amplifier can be biased to support the requirements
of PCS-1900, IS-136, or DCS-1800 systems.
The CMM1330 is packaged in a low-cost, space
efficient SO-8 power package that gives excellent electrical
stability and thermal handling performance with a RΘ of less
than 18° C/W. The part is designed to require minimal exter-
nal circuitry for bias matching, simplifying design and keep-
ing board space and cost to a minimum.
1.85 to 1.91 GHz
3V, 30 dBm PCS/PCN
Power Amplifier
Advanced Product Information
September 1996
(1 of 2)
Back plane is ground and
must be soldered to thermally
conductive ground plane.
Vg2 4
RF IN 1
Vg1 3
GND 2
6 RF OUT/Vd3
5 RF OUT/Vd3
8 Vd1
7 Vd2
Functional Block Diagram
Parameter
Condition
Min
Typ
Max
Units
Frequency Range
1.85
1.91
GHz
Power Output
Meets IS-136 TDMA mask
28.8
30.0
dBm
Efficiency
Pout IS-136 TDMA
30
35
%
Gain
28
30
dB
Harmonics (in Celeritek test fixture)
2nd @ Pout = +30.5 dBm
-30
dBc
3rd @ Pout = +30.5 dBm
-35
dBc
Return Loss
In Celeritek Test Fixture
10
dB
Negative Supply Current
1mA
Supply Current
600
mA
Quiescent Current
No RF
300
mA
Electrical Characteristics
Unless otherwise specified the following specifications are guaranteed at room temperature with drain voltage (+Vd) = 3.6 V, in Celeritek test fixture.
Recommended Operating Conditions
Parameter
Typ
Units
Parameter
Typ
Units
Drain Voltage (+Vd)
3.0 to 4.0
Volts
Operating Temperature (PC Board)
-30 to +80
°C
Absolute Maximum Ratings
Parameter
Rating
Parameter
Rating
Parameter
Rating
Drain Voltage (+Vd)
+9.0 V*
Power Dissipation
5 W
Operating Temperature
-40°C to +100°C
Drain Current (Id)
1.8 A
Thermal Resistance
18°C/W
Channel Temperature
175°C
RF Input Power
+15 dBm*
Storage Temperature
-65°C to +150°C
Soldering Temperature
260°C for 5 Sec.
DC Gate Voltage (-Vg)
-4.0 V*
* Max (+Vd) and (-Vg) under linear operation. Max potential difference across the device in RF compression (2Vd + |-Vg|) not to exceed the minimum breakdown voltage (Vbr) of +18V.