SN65LVDS388, SN65LVDT388, SN75LVDS388, SN75LVDT388

HIGH-SPEED DIFFERENTIAL LINE RECEIVERS

SLLS448A – SEPTEMBER 2000 – REVISED MAY 2001

3

POST OFFICE BOX 655303

– 0.5 V to 4 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range:

Enables or Y

– 0.5 V to 6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A or B

– 0.5 V to 4 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Electrostatic discharge: (see Note 2)

SN65’ (A, B, and GND)

Class 3, A:15 kV, B: 700 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

SN75’ (A, B, and GND)

Class 2, A:4 kV, B: 400 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous power dissipation

See Dissipation Rating Table

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range

– 65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 in) from case for 10 seconds

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.

2. Tested in accordance with MIL-STD-883C Method 3015.7.

DISSIPATION RATING TABLE

PACKAGE

TA ≤ 25°C

DERATING FACTOR‡

ABOVE TA = 25°C

TA = 70°C

POWER RATING

TA = 85°C

POWER RATING

DBT

1071 mW

8.5 mW/

°C

688 mW

556 mW

‡ This is the inverse of the junction-to-ambient thermal resistance when board-mounted (low-k) and with no air flow.

recommended operating conditions

MIN

NOM

MAX

UNIT

Supply voltage, VCC

3

3.3

3.6

V

High-level input voltage, VIH

Enables

2

V

Low-level input voltage, VIL

Enables

0.8

V

Magnitude of differential input voltage,

VID

0.1

0.6

V

Common-mode input voltage, VIC (see Figure 4)

|V

ID

|

2

2.4

*

|V

ID

|

2

V

VCC – 0.8

Operating free-air temperature TA

SN75’

0

70

°C

O erating free-air tem erature, TA

SN65’

– 40

85

°C