Electronic Components Datasheet Search |
|
AS6VA25616-TI Datasheet(PDF) 2 Page - Alliance Semiconductor Corporation |
|
AS6VA25616-TI Datasheet(HTML) 2 Page - Alliance Semiconductor Corporation |
2 / 9 page ® 2 ALLIANCE SEMICONDUCTOR 10/6/00 AS6VA25616 Functional description The AS6VA25616 is a low-power CMOS 4,194,304-bit Static Random Access Memory (SRAM) device organized as 262,144 words × 16 bits. It is designed for memory applications where slow data access, low power, and simple interfacing are desired. Equal address access and cycle times (tAA, tRC, tWC) of 55 ns are ideal for low-power applications. Active high and low chip selects (CS) permit easy memory expansion with multiple-bank memory systems. When CS is high, or UB and LB are high, the device enters standby mode: the AS6VA25616 is guaranteed not to exceed 66 µW power consumption at 3.3V and 55 ns. The device also returns data when VCC is reduced to 1.5V for even lower power consumption. A write cycle is accomplished by asserting write enable (WE) and chip select (CS) low, and UB and/or LB low. Data on the input pins I/O1–O16 is written on the rising edge of WE (write cycle 1) or CS (write cycle 2). To avoid bus contention, external devices should drive I/O pins only after outputs have been disabled with output enable (OE) or write enable (WE). A read cycle is accomplished by asserting output enable (OE), chip select (CS), UB and LB low, with write enable (WE) high. The chip drives I/O pins with the data word referenced by the input address. When either chip select or output enable is inactive, or write enable is active, or (UB) and (LB), output drivers stay in high-impedance mode. These devices provide multiple center power and ground pins, and separate byte enable controls, allowing individual bytes to be written and read. LB controls the lower bits, I/O1–I/O8, and UB controls the higher bits, I/O9–I/O16. All chip inputs and outputs are CMOS-compatible, and operation is from a single 2.7V to 3.3V supply. Device is available in the JEDEC standard 400-mm, TSOP II, and 48-ball FBGA packages. Absolute maximum ratings Note: Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions outside those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Truth table Key: X = Don’t care, L = Low, H = High. Parameter Device Symbol Min Max Unit Voltage on VCC relative to VSS VtIN –0.5 VCC + 0.5 V Voltage on any I/O pin relative to GND VtI/O –0.5 V Power dissipation PD –1.0 W Storage temperature (plastic) Tstg –65 +150 oC Temperature with VCC applied Tbias –55 +125 oC DC output current (low) IOUT –20 mA CS WE OE LB UB Supply Current I/O1–I/O8 I/O9–I/O16 Mode HX XX X ISB High Z High Z Standby (ISB) LX X H H LH H X X ICC High Z High Z Output disable (ICC) LH L LH ICC DOUT High Z Read (ICC) H L High Z DOUT LL DOUT DOUT LL X LH ICC DIN High Z Write (ICC) H L High Z DIN LL DIN DIN |
Similar Part No. - AS6VA25616-TI |
|
Similar Description - AS6VA25616-TI |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |