Amplifier, Power, 2W

7.1-11.7 GHz

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

Rev —

Advance Information

3

MAAP-000069-PKG003

RoHS

Compliant

Figure 2. Recommended Bias Configuration.

Note: The exposed pad centered on the package bottom must be connected to RF

and dc ground for proper electrical and thermal operation.

Figure 1. 5x5 mm 20-Lead MLP.

Refer to M/A-COM Application Note Surface Mounting Instructions for PQFN Packages #S2083* for assembly guidelines.

Additional Precaution: All parts must receive a bake-out of 125ºC for 24 hours prior to any solder reflow operation.

*Application Notes can be found by going to the Site Search Page of M/A-COM’s web page (http://www.macom.com/Application%20Notes/

index.htm) ) and searching for the required Application Note.

100pF

(as close to the package as possible)

0.1

μF

V

DD

100pF

(as close to the package as possible)

YYWW

AP069G

XXXX

MACOM

0.1

μF

V

GG

100pF

(as close to the package as possible)

100pF

(as close to the package as possible)