Electronic Components Datasheet Search |
|
CMP350-9601 Datasheet(PDF) 4 Page - Artesyn Technologies |
|
CMP350-9601 Datasheet(HTML) 4 Page - Artesyn Technologies |
4 / 5 page Notes 1 The unit must be powered up into the recommended minimum loads to ensure the outputs come up. 2 Combined maximum output power for Aux. 1, 2 and 3 is 220W. 3 For models -9604 and -9692, on the aux 1 channel, output ripple and noise is measured 6 inches down the output cables through a 1 foot long twisted pair terminated with a parallel combination of a 10µF electrolytic and a 0.1µF ceramic capacitors. For all other channels on all models, ripple and noise is measured directly at the output terminals. 4 No shutdown or latch-up occurs; voltage is internally limited to specified range. 5 Aux. 2 tracks Aux. 3, Aux. 4 not adjustable. 6 Aux. 3 tracks Aux. 2. 7 Output is not adjustable. 8 CMP350-9604 rated operation: The auxiliary channels must share power as indicated by graph 1. The maximum output power is 220W. 9 CMP350-9692 rated operation: The auxiliary channels must share power as indicated by graph 2. The maximum output power is 220W. 10 A minimum of 300LFM of forced air cooling is required for proper operation of the CMP350. 11 All outputs must be derated linearly from maximum specified loads during operation above 50 °C. 12 Current share is a single wire share circuit that allows the main output on multiple CMP350 units to be operated in parallel. Auxiliary channels share on -9604 and -9692 models by connecting the CSAUX channel. 13 The power fail detect and power OK signals are open-collector outputs which will sink 40mA or less in the low state and should be pulled up to a bias voltage with an appropriately sized resistor. Min. Max. VOL 0V 0.4V IOL 0A -40mA VOH 4V 40V The system inhibit and output inhibit signals require a current source to be asserted high. Min. Max. VIH 3.5V 15.0V IIH 0mA -10mA 14 Connection from TRIMAUX2 to AUX1SET causes the output for Ch. aux. 1 on models -9604 and -9692 to regulate at its nominal factory set voltage. 15 3 orthogonal axes, random vibration, 10 minute test per axes. 16 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. t1 t2 t1 Varies with line and load t2 ≥ 4ms t1 + t2 ≥ 20ms OUTPUT PFD SIGNAL AC INPUT POWER GOOD SIGNAL FEATURES Current share Forced Main output and (See Note 12) auxiliary 1 if 5V or 3.3V Power OK Asserted Low Main output >75% (See Note 13) Remote-sense 0.4V Main output and auxiliary 1 if 5V or 3.3V System inhibit Asserted high Inhibits all outputs Power fail detect Asserted low Indicates loss of AC (See Note 13) 4ms warning 15A * Max. load for AUX2 is 10A Max load for AUX3 is 5A Graph 1 3.3 V Channel Load RATED OPERATION 10A 5A 0A 20A 15A 10A 5A 10A 8A Sum of 12V Channel Loads* 15A * Max. load for AUX2 is 10A Max load for AUX3 is 5A Graph 2 5V Channel Load RATED OPERATION 10A 5A 0A 15A 10A 5A 10A 8A Sum of 12V Channel Loads* TRIM DOWN 12CH1 GND1 TRIMAIN TRIM UP TRIM UP/DOWN Main channel trim connections TRIM UP TRIM DOWN 12CH2 GND2 TRIMAUX TRIM UP/DOWN Aux. 1 channel trim connections. (-9601, -9602, -9603, 9606) Aux. 2 channel trim connections (-9604, -9692) Aux. 1 channel trim connections (-9604, -9692) TRIMAUX2 is connected to AUX1SET by a factory fitted jumper to ensure CH. 1 regulates at the nominal set voltage To trim CH1, remove the jumper and connect a resistor between GND3 and TRIMAUX2 TRIMAUX2 AUX1SET TRIM UP/DOWN TRIMAUX2 GND3 350 Watt AC/DC high wattage power supplies with PFC LOW TO MEDIUM POWER AC/DC POWER SUPPLIES | 350W AC/DC PAGE 65 http://www.artesyn.com EXTERNAL OUTPUT TRIMMING (14) 1 |
Similar Part No. - CMP350-9601 |
|
Similar Description - CMP350-9601 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |