Electronic Components Datasheet Search |
|
SWG10-48S70C04 Datasheet(PDF) 2 Page - Artesyn Technologies |
|
SWG10-48S70C04 Datasheet(HTML) 2 Page - Artesyn Technologies |
2 / 2 page PIN CONNECTIONS PIN NUMBER SINGLE OUTPUT 1 Remote ON/OFF 2 Sine Wave Reference 3 + Input, + Output Return 4 - Input 5 – Output Typical Application Close to Shut Off Output 36-72VDC Receiver Lift 25Hz, 6VAC V sine ref. R limit ≥ 200Ω Ceramic Coupling Capacitor 100V, 0.47 µF (See Note 1) Rem S/D Ref. IN 0V Vo -48V (250V,250mA slow blow output fuse) (250V, 500mA slow blow input fuse) Telephone Bell Model Notes 1 Sine wave reference: The SWG10 can amplify any sinusoidal reference signal with a frequency between 15Hz and 60Hz. Thus standard telecom ringer frequencies, such as 15Hz, 25Hz and 50Hz can be easily output. A sinewave reference needs to be coupled to the unit with a single 0.1µF to 1µF (100V) capacitor. 2 Efficiency measured with resistive load, 3 Output voltage range adjust: the output voltage is proportional to the reference sinewave at Ref-In pin (after external coupling capacitor). The ringer has a voltage gain of 30.8 (typ.). 4 Remote ON/OFF: The remote shutdown operates on. Open collector sink of 1mA to shut off. 5 The operating temperature range assumes that sufficient airflow exists to ensure the case/encapsulation temperature never exceeds +85oC. At any power up, the case temperature should not exceed +70oC. 6 The input and output fuses are essential because there is no internal short circuit or overcurrent protection circuitry. 7 System design should ensure that multiple ‘receiver lifts’ (modems, faxes, answering machines) do not occur simultaneously to cause peak output current to exceed the 400mA, 150ms maximum. 8 System design should ensure that ‘Sine Wave Reference’ pin 2 is set such that Vout never exceeds 80V. BOTTOM VIEW 0.30 (7.62) 0.6 (15.24) 0.3 (7.62) 3.00 (76.2) 0.2 (5.08) Total Height of unit 0.62 inches (15.7) 1 2 4 3 5 0.30 (7.62) 0.30 (7.62) 2.5 (63.5) 0.5 (12.7) 1.3 (33.02) 2.4 (60.96) ALL DIMENSIONS IN INCHES (mm) INPUT OUTPUT OUTPUT OUTPUT TYPICAL MODEL VOLTAGE VOLTAGE RANGE (8) FREQUENCY CURRENT (7) EFFICIENCY (2) NUMBER 36-72VDC 0V rms to 80V rms 15Hz to 60Hz 100mA 65% SWG10-48S70C04 10VA DC/AC ring generator TELEPHONE RING GENERATORS | 10VA DC/AC PAGE 171 http://www.artesyn.com Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. 6 |
Similar Part No. - SWG10-48S70C04 |
|
Similar Description - SWG10-48S70C04 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |