10

Regulatory Compliance

Electrostatic Discharge

There are two conditions in

which immunity to ESD damage

is important. The first condition

is during handling of the

transceiver prior to insertion

into the transceiver port. To

protect the transceiver, it is

important to use normal ESD

handling precautions. The ESD

sensitivity of the HFCT-5760xxx

is compatible with typical

industry production

environments. The second

condition is static discharges to

the exterior of the host

equipment chassis after

installation. To the extent that

the duplex LC optical interface

is exposed to the outside of the

host equipment chassis, it may

be subject to system-level ESD

requirements.

The ESD performance of the

HFCT-5760xxx exceeds typical

industry standards.

Immunity

Equipment hosting the HFCT-

5760xxx modules will be

subjected to radio-frequency

electromagnetic fields in some

environments. These

transceivers have good

immunity to such fields due to

their shielded design.

Eye Safety

These 1300 nm FP laser based

transceivers provide Class 1 eye

safety by design. Agilent has

tested the transceiver design for

compliance with the

requirements listed in Table 3

under normal operating

conditions and under a single

fault condition.

Electromagnetic Interference (EMI)

Most equipment designs utilizing

these high-speed transceivers

from Agilent will be required to

meet the requirements of FCC in

the United States, CENELEC

EN55022 (CISPR 22) in Europe

and VCCI in Japan.

The metal housing and shielded

design of the HFCT-5760xxx

minimize the EMI challenge

facing the host equipment

designer. These transceivers

provide superior EMI

performance. This greatly

assists the designer in the

management of the overall

system EMI performance.

Feature

Test Method

Performance

Electrostatic Discharge (ESD) to

the Electrical Pins

MIL-STD-883C

Method 3015

Class 1 (>2000 Volts)

Electrostatic Discharge (ESD) to

the Duplex LC Receptacle

Bellcore GR1089-CORE

25 kV Air Discharge

10 Zaps at 8 kV (contact discharge) on the electrical faceplate on

panel.

Electromagnetic Interference (EMI) FCC Class B

Applications with high SFP port counts are expected to be compliant;

however, margins are dependent on customer board and chassis

design.

Immunity

Variation of IEC 61000-4-3

No measurable effect from a 10 V/m field swept from 80 to 1000 MHz

applied to the transceiver without a chassis enclosure.

Eye Safety

US FDA CDRH AEL Class 1

EN (IEC) 60825-1, 2,

EN60950 Class 1

HFCT-5760NL CDRH certification # 9521220-46

HFCT-5760NP CDRH certification # 9521220-78

HFCT-5760TL CDRH certification # 9521220-47

HFCT-5760TP CDRH certification # 9521220-80

HFCT-5760ANL CDRH certification # TBD

HFCT-5760ANP CDRH certification # TBD

HFCT-5760ATL/ATP CDRH certification # 9521220-96

HFCT-5760NL TUV file # 933/510206/03

HFCT-5760NP TUV file # TBD

HFCT-5760TL TUV file # 933/510116/02

HFCT-5760TP TUV file # TBD

HFCT-5760ANL TUV file # TBD

HFCT-5760ANP TUV file # TBD

HFCT-5760ATL/ATP TUV file # 933/510305/03

UL file # E173874

Component Recognition

Underwriter's Laboratories and Canadian

Standards Association Joint Component

Recognition for Information Technology

Equipment Including Electrical Business

Equipment

UL file # E173874

Table 3. Regulatory Compliance