IBIS4-6600
Datasheet
Cypress Semiconductor Corporation
3901 North First Street
San Jose, CA 95134
408-943-2600
Contact: info@Fillfactory.com
Document #: 38-05708 Rev.**(Revision 1.3 )
Page 9 of 63
Feature
Specification/Description
Interface
Serial-to Parallel Interface (SPI).
Package
68-pins LCC.
2.4 Electrical specifications
2.4.1 Absolute maximum ratings
Table 4: Absolute maximum ratings
Symbol
Parameter
Value
Unit
VDD
DC supply voltage
-0.5 to 3.3
V
VIN
DC input voltage
-0.5 to (VDC +0.5)
V
VOUT
DC output voltage
-0.5 to (VDC + 0.5)
V
IIO
DC current drain per pin; any single input
or output.
± 50
mA
TL
Lead temperature (5 seconds soldering).
350
°C
Absolute Ratings are those values beyond which damage to the device may occur.
VDD = VDDD = VDDA (VDDD is supply to digital circuit, VDDA to analog circuit).
2.4.2 Recommended operating conditions
Table 5: Recommended operating conditions
Symbol
Parameter
Min
Typ
Max
Unit
VDD
DC supply voltage
2.5
2.5
3.3
V
TA
Commercial operating
temperature.
0
0
24
24
50
38
°C (@ 15% RH)
°C (@ 86% RH)
RH = Relative Humidity
All parameters are characterized for DC conditions after thermal equilibrium has been
established.
Unused inputs must always be tied to an appropriate logic level, e.g. either VDD or GND.
This device contains circuitry to protect the inputs against damage due to high static voltages
or electric fields; however it is recommended that normal precautions be taken to avoid
application of any voltages higher than the maximum rated voltages to this high impedance
circuit.