U2752M

Rev. A1, 29-Jun-98

Preliminary Information

6 (6)

Ozone Depleting Substances Policy Statement

It is the policy of TEMIC Semiconductor GmbH to

1. Meet all present and future national and international statutory requirements.

2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems

with respect to their impact on the health and safety of our employees and the public, as well as their impact on

the environment.

It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as

ozone depleting substances ( ODSs ).

The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and

forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban

on these substances.

TEMIC Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of

ODSs listed in the following documents.

1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively

2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental

Protection Agency ( EPA ) in the USA

3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively.

TEMIC Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting

substances and do not contain such substances.

We reserve the right to make changes to improve technical design and may do so without further notice.

Parameters can vary in different applications. All operating parameters must be validated for each customer

application by the customer. Should the buyer use TEMIC products for any unintended or unauthorized

application, the buyer shall indemnify TEMIC against all claims, costs, damages, and expenses, arising out of,

directly or indirectly, any claim of personal damage, injury or death associated with such unintended or

unauthorized use.

TEMIC Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany

Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423