www.ti.com

DESCRIPTION (CONTINUED)

ABSOLUTE MAXIMUM RATINGS

RECOMMENDED OPERATING CONDITIONS

TPS72501

TPS72515, TPS72516

TPS72518, TPS72525

SLVS341D – MAY 2002 – REVISED MARCH 2004

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Although an output capacitor is not required for stability, transient response and output noise are improved with a

10-µF output capacitor.

Unlike some regulators that have a minimum current requirement, the TPS725 family is stable with no output

load current. The low noise capability of this family, coupled with its high current operation and ease of power

dissipation, make it ideal for telecom boards, modem banks, and other noise-sensitive applications.

ORDERING INFORMATION

SYMBOL

SYMBOL

Adjustable (1.2 V to 5 V)

TPS72501DCQ

PS72501

TPS72501KTT

TPS72501D

TPS72501

1.5 V

TPS72515DCQ

PS72515

TPS72515KTT

—

TPS72515

-40

°C to

1.6 V

TPS72516DCQ

PS72516

TPS72516KTT

—

TPS72516

125

°C

1.8 V

TPS72518DCQ

PS72518

TPS72518KTT

—

TPS72518

2.5 V

TPS72525DCQ

PS72525

TPS72525KTT

—

TPS72525

(1)

Other voltage options are available upon request from the manufacturer.

(2)

To order a taped and reeled part, add the suffix R to the part number (e.g., TPS72501DCQR).

(3)

To order a 50-piece reel, add the suffix T (e.g., TPS72501KTTT); to order a 500-piece reel, add the suffix R (e.g., TPS72501KTTR).

(4)

To order a taped and reeled part, add the suffix R or T (2500 or 500) to the part number (e.g. TPS72501DR)

UNIT

(2)

-0.3 to 7

V

Voltage range at EN, FB

V

Voltage on OUT, RESET

6

V

ESD rating, HBM

2

kV

Continuous total power dissipation

See Dissipation Ratings Table

-50 to 150

°C

150

°C

-65 to 150

°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values are with respect to network ground terminal.

MIN NOM

MAX UNIT

(1)

1.8

6

V

0

1

A

-40

125

°C

(1)

2