AP1506

150KHz, 3A PWM Buck DC/DC Converter

This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of

this product. No rights under any patent accompany the sale of the product.

Rev.1.3 Oct 24, 2005

1/13

Features

- Output voltage: 3.3V, 5V, 12V and adjustable

output version

- Adjustable version output voltage range, 1.23V to

18V+4%

- 150KHz +15% fixed switching frequency

- Voltage mode non-synchronous PWM control

- Thermal-shutdown and current-limit protection

- ON /OFF shutdown control input

- Operating voltage can be up to 22V

- Output load current: 3A

- TO220-5L, TO263-5L and PDIP-8 packages

- Low power standby mode

- Built-in switching transistor on chip

Applications

- Simple High-efficiency step-down regulator

- On-card switching regulators

- Positive to negative converter

General Description

The AP1506 series are monolithic IC designed for a

step-down DC/DC converter, and own the ability of

driving a 3A load without external transistor. Due to

reducing the number of external component, the

board space can be saved easily. The external

shutdown function can be controlled by logic level

and then come into standby mode. The internal

compensation makes feedback control have good

line and load regulation without external design.

Regarding protected function, thermal shutdown is

to prevent over temperature operating from damage,

and current limit is to prevent over current operating

of the output switch.

If current limit function

switching frequency will be reduced. The AP1506

series operate at a switching frequency of 150KHz

thus allowing smaller sized filter components than

what would be needed with lower frequency

switching regulators. Other features include a

guaranteed +4% tolerance on output voltage under

specified input voltage and output load conditions,

and +15% on the oscillator frequency. The output

version included fixed 3.3V, 5V, 12V, and an

adjustable type. The packages are available in a

standard 5-lead TO-220, a 5-lead TO-263 or 8-lead

PDIP.

Pin Assignments

TO220-5L

( Top View )

1 V

IN

5 SD

4 FB

3 GND

2 Output

( Top View )

TO263-5L

1 V

IN

5 SD

4 FB

3 GND

2 Output

Metal Tab GND

Output

FB

SD

GND

GND

GND

GND

1

3

2

4

8

6

7

5

PDIP-8L

(Top View)

V

IN

Pin Descriptions

Pin #

Pin

Name

TO

PDIP

Description

1

1

Operating voltage input

Output

2

2

Switching output

GND

3

5~8

Ground

FB

4

3

Output voltage feedback

control

SD

5

4

ON /OFF Shutdown

This Anachip version datasheet is replaced

with Diodes Inc. datasheet AP1506