MITSUBISHI RF MOSFET MODULE

RA30H3340M

RoHS Compliance , 330-400MHz 30W 12.5V, 3 Stage Amp. For MOBILE RADIO

RA30H3340M

MITSUBISHI ELECTRIC

1 Aug 2006

1/7

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

1

2

3

4

5

RF Ground (Case)

PACKAGE CODE: H2S

2

4

1

5

3

BLOCK DIAGRAM

DESCRIPTION

The RA30H3340M is a 30-watt RF MOSFET Amplifier

Module for 12.5-volt mobile radios that operate in the 330- to

400-MHz range.

The battery can be connected directly to the drain of the

enhancement-mode MOSFET transistors. Without the gate

drain and the RF input signal attenuates up to 60 dB. The output

power and drain current increase as the gate voltage increases.

With a gate voltage around 4V (minimum), output power and

drain current increases substantially. The nominal output power

becomes available at 4.5V (typical) and 5V (maximum). At

This module is designed for non-linear FM modulation, but may

also be used for linear modulation by setting the drain quiescent

current with the gate voltage and controlling the output power

with the input power.

FEATURES

• Enhancement-Mode MOSFET Transistors

• Broadband Frequency Range: 330-400MHz

• 66 x 21 x 9.8 mm

• Linear operation is possible by setting the quiescent drain

current with the gate voltage and controlling the output power

with the input power

RoHS COMPLIANCE

• RA30H3340M-101 is a RoHS compliant products.

• RoHS compliance is indicate by the letter “G” after the Lot Marking.

• This product include the lead in the Glass of electronic parts and the

lead in electronic Ceramic parts.

How ever ,it applicable to the following exceptions of RoHS Directions.

1.Lead in the Glass of a cathode-ray tube, electronic parts, and

fluorescent tubes.

2.Lead in electronic Ceramic parts.

ORDERING INFORMATION:

ORDER NUMBER

SUPPLY FORM

RA30H3340M-101

Antistatic tray,

10 modules/tray