M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

Also Offering

RoHs Compliant

Surface Mount Low Power

Step Recovery Diodes

V4

MA44700 Series

3

Mounting Information

The

illustration

indicates

the

recommended

mounting

pad

configuratio n

for

the

SOT-23

and

SC-79

packages.

Solder

paste

containing flux should be screened onto the pads to

a thickness of 0.005- 0.007 inches. The plastic

package is placed in position, firmly adhering to the

solder paste.

Permanent attachment is performed by a reflow

soldering

procedure

during

which

the

tab

temperature does not exceed +275

°C and the body

temperature does not exceed +250

°C, for standard

models and +260

°C for the RoHS compliant

devices.

Please refer to Application Note M538 for surface

mounting instructions.

SC-79

0.020

0.50

0.053

1.35

inches

mm

Dimenstions:

0.020

0.50

0.75

1.9

.037

0.95

.035

0.90

.090

2.2

.030

0.80

inches

mm

Dimenstions:

min.

min.

SOT-23

Package Configuration

SOT-23

Case Style 287

SC-79

Case Style 1279