High Power Linear Amplifier

5.7 - 5.9 GHz

MAAP-007899

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V3P

2

RoHS

Compliant

Absolute Maximum Ratings

4,5

Parameter

Absolute Maximum

Input Power

+ 5 dBm

Operating Supply Voltage

+6.0 Volts

Operating Control Voltage

+5.5 Volts

Operating Temperature

-40 °C to +85 °C

Channel Temperature

+150 °C

Storage Temperature

-40 °C to +150 °C

4. Exceeding any one or combination of these limits may cause

permanent damage to this device.

5. M/A-COM does not recommend sustained operation near

these survivability limits.

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Frequency

GHz

5.7

—

5.9

Gain

5.8 GHz

dB

—

23

—

Gain Flatness

5.7 to 5.9 GHz

dB

—

±0.25

—

Input Return Loss

5.8 GHz

dB

—

13

—

Output Return Loss

5.8 GHz

dB

—

9

—

Output P1dB

5.8 GHz

dBm

—

28

—

EVM

3

OFDM, QAM-64, 54 Mbps

%

—

3

—

Device / Supply Voltage

V

—

5

—

Enable Voltage

V

mA

—

—

5

9

—

—

Active Supply Current

mA

—

475

—

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

Lead-Free 4 mm 16-Lead PQFN

†

3. Includes system EVM of 0.8%.

†

Reference Application Note M538 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.