Electrical Parameters

As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with following specific requirements

based on room temperature (25°C) parameters:

•

Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 15% over that range.

•

Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 1,000

megohm microfarads or 100 gigohm, whichever is less.

•

Capacitance and Dissipation Factor (DF) measured at 1kHz and 1 Vrms.

DF Limits are:

Soldering Process

These components are suitable for reflow and wave soldering. All parts incorporate the standard KEMET

barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resist-

ance to leaching.

Marking

These chips will be supplied unmarked. If required, they can be laser-marked as an extra option.

Details on the marking format are included in KEMET Surface Mount catalog F3102.

In general, the information in the KEMET Surface Mount catalog F3102 applies to these

capacitors. The information in this bulletin supplements that in the catalog.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

C

0805

S

103

K

5

R

A

C

Style

C - Ceramic

Size Code

0402, 0603, 0805, 1206, 1210, 1812

Specification

S - Floating Electrode

Capacitance Code, pF

First two digits represent significant figures.

Third digit specifies number of zeros. 100 pF = 101.

(Use “9” for 1.0 through 9.9 pF)

Capacitance Tolerance

K = ±10%; M = ±20%; J = ±5%

Voltage

4 = 16V, 3 = 25V, 5 = 50V

1 = 100V, 2 = 200V, A = 250V

Temperature Characteristic

Designated by Capacitance

Change over Temperature Range

R – X7R (±15%) (-55°C +125°C)

End Metallization

C = Standard

Failure Rate Level

A = Not Applicable

Ordering Information

50 - 250 Volts

2.5%

16 - 25 Volts

3.5%