|
| XR19L212 |
|
||
|
EXAR |
|
1 page
Exar Corporation 48720 Kato Road, Fremont CA, 94538 • (510) 668-7000 • FAX (510) 668-7017 • www.exar.com XR19L212 TWO CHANNEL INTEGRATED UART AND RS-232 TRANSCEIVER MAY 2007 REV. 1.0.0 GENERAL DESCRIPTION The XR19L212 (L212) is a highly integrated device that combines a full-featured two channel Universal Asynchronous Receiver and Transmitter (UART) and RS- 232 transceivers. The L212 is designed to operate with a single 3.3V or 5V power supply. The L212 is fully compliant with EIA/TIA-232-F Standards from a +3.3V to +5.5V power supply. The device operates at 1 Mbps data rate with worst case 3K ohms load. Both RS-232 driver outputs and receiver inputs can operate in harsh electrical environments of +/-15V without damage and can survive multiple +/-15kV ESD on the RS-232 lines, while maintaining RS-232 output levels. The L212 operates in four different modes: Active, Partial Sleep, Full Sleep and Power-Save. Each mode can be invoked via hardware or software. Upon power-up, the L212 is in the Active mode where the UART and RS-232 transceiver function normally. In the Partial Sleep mode, the internal crystal oscillator of the UART or charge pump of the RS-232 transceiver is turned off. In Full Sleep mode, both the crystal oscillator and the charge pump are turned off. While the UART is in the Sleep mode, the Power-Save mode isolates the core logic from the control signals (chip select, read/write strobes, address and data bus lines) to minimize the power consumption. The RS-232 receivers remain active in any of these four modes. APPLICATIONS • Battery-Powered Equipment • Handheld and Mobile Devices • Handheld Terminals • Industrial Peripheral Interfaces • Point-of-Sale (POS) Systems FEATURES • Meets true EIA/TIA-232-F Standards from +3.3V to +5.5V operation • Up to 1 Mbps data transmission rate • 45us sleep mode exit (charge pump to full power) • ESD protection for RS-232 I/O pins at ■ +/-15kV - Human Body Model ■ +/-15kV - IEC 61000-4-2, Air-Gap Discharge ■ +/- 8kV - IEC 61000-4-2, Contact Discharge • Software compatible with industry standard 16550 UART • Intel/Motorola bus select • Complete modem interface • Sleep and Power-save modes to conserve battery power • Wake-up interrupt upon exiting low power modes FIGURE 1. BLOCK DIAGRAM XR19L212 UART RS-232 Transceiver PwrSave A2:A0 D7:D0 IOR# IOW# (R/W#) CSA# (CS#) CSB# INTA (IRQ#) INTB RESET (RESET#) I/M# Crystal Osc/Buffer BRG 64 Byte TX & RX FIFO Modem I/Os TXA RXA RTSA# CTSA# Charge Pump TXDA RTSA 5K RXDA 5K CTSA *5 V Tolerant Inputs VREF+ VREF- Channel B CTSB# Channel A RTSB# TXB RXB Channel B Transceiver Ch A Transceiver RXBSEL CTSB RTSB TXDB TXB RXDB RXB (See Figure 6) |
|
Link URL |
Sponsor of Alldatasheet |
|
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Bookmark | Link Exchange | Manufacturer List All Rights Reserved© Alldatasheet.com 2003 - 2012 |
| Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com | Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl |