Mechanical Description

Figure 4 is an overview drawing of the module with approximate dimensions. If a detailed

drawing is desired, especially for a design in application, a full size drawing is available

upon request.

Figure 4. PI200M-A4 Module Outline

PAGE 7 OF 7 - PI200M-A4, 01/31/01

READ

LINE

6.0

PIN

1

232

82.5

82.5

SCAN

DIRECTION

ALL DIMENSIONS IN MM UNLESS SPECIFIED

END VIEW

SIDE

TAPE

THE SURFACE

OF THE GLASS

ø1.65± HOLE

1X1-M2 TAPSIZE USE (DP6)

ø2.2±0.05 HOLE

2X2-M2.6 TAPSIZE USE (DP6)

21.5

7.1±0.2

16.2±0.2

15.5±0.2

1.25

©2001 AMI Semiconductor.

Printed in USA. All rights reserved. Specifications

are subject to change without notice. Contents may not be reproduced in whole or in part without

the express prior written permission of AMIS. Information furnished herein is believed to be

accurate and reliable. However, no responsibility is assumed by AMIS for its use nor for any

infringement of patents or other rights granted by implication or otherwise under any patent

or patent rights of AMIS.