2
Specifications are subject to change without notice (12.09.2005)
MPFRS
Rated operation dist. (Sn)
15 m - 8 m (UL 325)
Light source
LED 880 nm
Light type
Infrared modulated
Ambient light
> 20.000 lux
Housing material
MPFT15-4/C
MPFT15-D18-4/C
MPFR-4/C
MPFR-D18-4/C
Housing
PC
Backpart
ABS
MPFT15-M14-4/C
MPFR15-M14-4/C
Housing
Stainless steel/PC
Backpart
PTE
Connection
MPFT15-XXX-4
MPFR15-XXX-4
Cable
PVC, grey, 10 m, Ø 2.9 mm2
Specifications, Photoelectric Switches
Specifications, Amplifier
Output function
MPF1+2
Relay 2 x SPST
MPF3
Relay 2 x SPST + 2 x SPST
Indication function
Supply ON
LED, green
Beam ON (no object present) LED, yellow
Environment
Overvoltage category
III (IEC 66064)
Degree of protection
IP 40 (IEC 60529/60947-5-2)
Pollution degree
3 (IEC 60664/60664A,
60947-1)
Temperature
Operating
-20° to +60°C (-4° to +140°F)
Storage
-30° to +80°C (-22° to +176°F)
Connection
Screw terminals
(max. 2.5 mm2)
Protection output
Reverse output, transients,
short-circuit
Test input
MPF.- 230 RS.
Potential-free contact
MPF.- 115 RS.
Potential-free contact
MPF.- 912 RS.
Max. 28 V@15 mA AC/DC
Testfunction activated
≥ 3.5 V AC/DC
Testfunction deactivated
≤ 1.0 V AC/DC
MPF.- 912 RSI.
Max. 28 V@15 mA AC/DC
Testfunction deactivated
≥ 3.5 V AC/DC
Testfunction activated
≤ 1.0 V AC/DC
Housing material
PC
Weight
MPF.- 115/230 RS
280 g
MPF.- 912 RS
126 g
CE-marking
Yes
UL-marking
Yes (UL 508, UL 325)
TÛV-marking
Yes (EN 12453)
Rated operational volt.
AC types (UB)
Terminals 1 & 3
MPF.- 230 RS.
230 VAC ± 15%, 50 to 60 Hz
MPF.- 115 RS.
115 VAC ± 15%, 50 to 60 Hz
MPF.- 912 RS.
12-24 VAC/DC ± 15%, 50 to 60 Hz
Dielectric voltage
MPF.- 230 RS.
4 kVAC (rms)
Rated impulse withstand volt.
4 kV (1.2/50
μs)
Rated operational power
MPF.- 912 RS
AC supply
3 VA
DC supply
2 W
MPF.- 115/230 RS
AC supply
max. 4.5 VA
DC supply
max. 4.5 VA
Output Specifications
Resistive load
MPF.-xxx RS, RSA, RSI, RSAI
600.000 switchings
1 A@250 VAC/30 VDC
300.000 switchings
2 A@250 VAC/30 VDC
100.000 switchings
2 A@250 VAC/30 VDC (UL)
AC15
0.75 A@240 VAC
AC14
0.60 A@120 VAC
DC13
0.22 A@125 VDC
Rated insulation volt. (Ui)
MPF.- 230 RS.
250 VAC (rms)
MPF.- 115 RS.
120 VAC (rms)
MPF.- 912 RS.
50 VAC (rms), 50 VDC
Operating frequency (f)
Light/dark ratio 1:1
Contact output
10 Hz
Response time
OFF-ON (tON)
≤ 50 ms
ON-OFF (tOFF)
≤ 40 ms
Power ON delay (tv)
≤ 300 ms
MPFT15-XXX-4C
Red connector pair
MPFR15-XXX-4C
White connector pair
Connector is placed 15 cm from sensorhead
Cable
PVC, grey, 10 m, Ø 2.9 mm2
Degree of protection
IP 67 (IEC 60529/60947-5-2)
Mounting
“Snap-ON”
Ø12 mm or fitting
MPFT15-4/C
MPFR-4/C
Rubber profile
D18
MPFT15-D18-4/C
MPFR-D18-4/C
Threaded barrel
M14
MPFT15-M14-4/C
MPFR-M14-4/C
CE-marking
Yes
UL-marking
Yes (UL 508, UL 325)
TÛV-marking
Yes (EN 12453)