M25PX32-VMW6F datasheet(10/63 Pages) STMICROELECTRONICS

Part #	M25PX32-VMW6F

Description	32-Mbit, dual I/O, 4-Kbyte subsector erase, serial Flash memory with 75 MHz SPI bus interface

Download	63 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

10 / 63 page

Signal descriptions

M25PX32

10/63

2.6

Write Protect/Enhanced Program supply voltage (W/VPP)

W/VPP is both a control input and a power supply pin. The two functions are selected by the

voltage range applied to the pin.

If the W/VPP input is kept in a low voltage range (0 V to VCC) the pin is seen as a control

input. This input signal is used to freeze the size of the area of memory that is protected

against program or erase instructions (as specified by the values in the BP2, BP1 and BP0

bits of the Status Register. See Table 9).

If VPP is in the range of VPPH (as defined in Table 14) it acts as an additional power supply

during the Bulk Erase cycle. In this case VPP must be stable until the Bulk Erase algorithm is

completed.

2.7

VCC supply voltage

VCC is the supply voltage.

2.8

VSS ground

VSS is the reference for the VCC supply voltage.

Similar Part No. - M25PX32-VMW6F

Manufacturer	Part #	Datasheet	Description
Micron Technology	M25PX32-VZM6F	754Kb / 56P	M25PX32 3V NOR Serial Flash Embedded Memory

Manufacturer	Part #	Datasheet	Description
Numonyx B.V	M25PX32	1Mb / 65P	32-Mbit, dual I/O, 4-Kbyte subsector erase, serial Flash memory with 75 MHz SPI bus interface
Micron Technology	M25PX16SOVZM6TP	1Mb / 65P	16-Mbit, dual I/O, 4-Kbyte subsector erase, serial Flash memory with 75 MHz SPI bus interface
Numonyx B.V	M25PX64-VMF6TP	1Mb / 70P	64-Mbit, dual I/O, 4-Kbyte subsector erase, serial flash memory with 75 MHz SPI bus interface
	M25PX16-VMN6TP	1Mb / 65P	16-Mbit, dual I/O, 4-Kbyte subsector erase, serial Flash memory with 75 MHz SPI bus interface
	M25PX64	1Mb / 66P	64-Mbit, dual I/O, 4-Kbyte subsector erase, serial flash memory with 75 MHz SPI bus interface
Micron Technology	N25Q032A13E1241F	5Mb / 153P	32-Mbit 3 V, multiple I/O, 4-Kbyte subsector erase, XiP enabled, serial flash memory with 108 MHz SPI bus interface
Numonyx B.V	N25Q128	5Mb / 185P	128-Mbit, 1.8 V, multiple I/O, 4-Kbyte subsector erase on boot sectors, XiP enabled, serial flash memory with 108 MHz SPI bus interface
Numonyx B.V	N25Q128	5Mb / 180P	128-Mbit 3 V, multiple I/O, 4-Kbyte subsector erase on boot sectors,XiP enabled, serial flash memory with 108 MHz SPI bus interface
Micron Technology	N25Q128A11B1241F	5Mb / 185P	128-Mbit, 1.8 V, multiple I/O, 4-Kbyte subsector erase on boot sectors, XiP enabled, serial flash memory with 108 MHz SPI bus interface
Numonyx B.V	M25P32	1,011Kb / 53P	32-Mbit, low voltage, serial Flash memory with 75 MHz SPI bus interface