5SHZ 08F6000

ABB Semiconductors AG reserves the right to change specifications without notice.

Doc. No. 5SYA1231-01 Sep. 01

page 4 of 8

Gate Unit

Gate Unit

Power supply (see Fig. 7 to 10)

Gate Unit supply voltage

20

Without galvanic isolation to power

circuit.

Gate Unit power consumption

≤

58 W

δ = 0.33

X1

Gate Unit power connector

Optical control input/output (see Fig. 8 to 10)

Optical input power

>

-20 dBm

Optical noise power

<

-45 dBm

Optical output power

>

-15 dBm

Optical noise power

<

-50 dBm

Valid for 1mm plastic optical fibre

(POF)

Pulse width threshold

≤ 400 ns

Max. pulse width without response

CS

Receiver for command signal

SF

Transmitter for status feedback

Visual feedback (see Fig. 8, 9)

LED1 (green)

Power supply voltage ok

"Light" when power supply is within specified rang

LED2 (green)

Gate-cathode interface ok

"Light" when no short circuit, no open and mouning

force is applied.

LED3 (yellow)

Off gated

"Light" when gate-current is flowing

LED4 (red)

Off gated

"Light" when GCT is off

LED5 (red)

Not ready (failure)

(optional)

Note 1: Phoenix Contact, www.phoenixcontact.com

Note 2: Agilent Technologies, www.semiconductor.agilent.com