TICP206 SERIES

SILICON TRIACS

PRODUCT

INFORMATION

1

MARCH 1988 - REVISED MARCH 1997

Information is current as of publication date. Products conform to specifications in accordance

with the terms of Power Innovations standard warranty. Production processing does not

necessarily include testing of all parameters.

Copyright © 1997, Power Innovations Limited, UK

q

1.5 A RMS

q

Glass Passivated Wafer

q

400 V to 600 V Off-State Voltage

q

q

Package Options

PACKAGE

PACKING

PART # SUFFIX

LP

Bulk

(None)

LP with fomed leads

Tape and Reel

R

LP PACKAGE

(TOP VIEW)

MDC2AA

G

MT2

MT1

1

2

3

LP PACKAGE

WITH FORMED LEADS

(TOP VIEW)

G

MDC2AB

MT2

MT1

1

2

3

absolute maximum ratings

over operating case temperature (unless otherwise noted)

NOTES: 1. These values apply bidirectionally for any value of resistance between the gate and Main Terminal 1.

2. This value applies for 50-Hz full-sine-wave operation with resistive load. Above 85°C derate linearly to 110°C case temperature at

the rate of 60 mA/°C.

3. This value applies for one 50-Hz full-sine-wave when the device is operating at (or below) the rated value of on-state current.

Surge may be repeated after the device has returned to original thermal equilibrium. During the surge, gate control may be lost.

4. This value applies for one 50-Hz half-sine-wave when the device is operating at (or below) the rated value of on-state current.

Surge may be repeated after the device has returned to original thermal equilibrium. During the surge, gate control may be lost.

5. This value applies for a maximum averaging time of 20 ms.

RATING

SYMBOL

VALUE

UNIT

Repetitive peak off-state voltage (see Note 1)

TICP206D

TICP206M

400

600

V

Full-cycle RMS on-state current at (or below) 85°C case temperature (see Note 2)

1.5

A

Peak on-state surge current full-sine-wave (see Note 3)

10

A

Peak on-state surge current half-sine-wave (see Note 4)

12

A

Peak gate current

±0.2

A

Average gate power dissipation at (or below) 85°C case temperature (see Note 5)

0.3

W

Operating case temperature range

-40 to +110

°C

Storage temperature range

-40 to +125

°C

Lead temperature 1.6 mm from case for 10 seconds

230

°C

electrical characteristics at 25°C case temperature (unless otherwise noted)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

Repetitive peak off-

state current

±20

µA

Peak gate trigger

current

8

-8

-8

10

mA

Peak gate trigger

voltage

2.5

-2.5

-2.5

2.5

V

† All voltages are with respect to Main Terminal 1.