- 612 -

3.0SMCJ SERIES

Surface Mount Transient Voltage Suppressor

Voltage Range

5.0 to 170 Volts

3000 Watts Peak Power

Features

For surface mounted application

Low profile package

Built-in strain relief

Glass passivated junction

Excellent clamping capability

Fast response time: Typically less than 1.0ps from 0 volt to

BV min.

μA above 10V

High temperature soldering guaranteed:

260

Plastic material used carries Underwriters Laboratory

Flammability Classification 94V-0

3000 watts peak pulse power capability with a 10 X 1000 us

waveform by 0.01% duty cycle

Mechanical Data

Case: Molded plastic

Terminals: Solder plated

Polarity: Indicated by cathode band

Standard packaging: 16mm tape (EIA STD RS-481)

Weight: 0.21gram

SMC/DO-214AB

Dimensions in inches and (millimeters)

Maximum Ratings and Electrical Characteristics

Rating at 25

℃ambient temperature unless otherwise specified.

Type Number

Symbol

Value

Units

(Note 1)

Minimum 3000

Watts

Steady State Power Dissipation

Pd

5

Watts

Peak Forward Surge Current, 8.3 ms Single Half

Sine-wave Superimposed on Rated Load

(JEDEC method) (Note 2, 3) - Unidirectional Only

200

Amps

Maximum Instantaneous Forward Voltage at

100.0A for Unidirectional Only (Note 4)

3.5 / 5.0

Volts

Operating and Storage Temperature Range

-55 to + 150

2. Mounted on 8.0mm

3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute

Maximum.

3.0SMCJ170 Devices.

Devices for Bipolar Applications

1. For Bidrectional Use C or CA Suffix for Types 3.0SMCJ5.0 through Types 3.0SMCJ170.

2. Electrical Characteristics Apply in Both Directions.

.129(3.27)

.118(3.0)

.012(.31)

.006(.15)

.008(.20)

.004(.10)

.060(1.52)

.030(0.76)

.245(6.22)

.220(5.59)

.280(7.11)

.260(6.60)

.103(2.62)

.079(2.00)

.320(8.13)

.305(7.75)