AN204

Rev. 1.5

3

Select a file using the File Name box. Clicking the folder icon brings up the standard windows file dialog. If Input

from file is selected, the dialog will be an open file dialog. If Output to file is selected, the dialog will be a save file

dialog.

Figure 4. Input/Output File

When the software inputs register values from a file, the values are written in the order they appear in the file. The

file can be arranged so that a specific sequence of direct and indirect register writes is performed. Bit 7 of

Register 0 and any registers that are not mentioned in the file are not written. If the Calibrate box is checked,

values for registers 96 and 97 are ignored and a full calibration is performed while inputting the file. If the software

is in daisy chain mode, the register values are input or output from the current channel only. The View File button

starts Microsoft® Notepad with the file in the File Name box. (See Figure 4.) The register numbers are in decimal,

and the values are in hexadecimal.

1.5. Tabs

There are tabs in the lower right-hand corner of the screen. Clicking on the tabs will show various panes.