 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
405EZ Datasheet(PDF) 10 Page - Applied Micro Circuits Corporation |
|
||||||||||||||||||||||||||||||
405EZ Datasheet(HTML) 10 Page - Applied Micro Circuits Corporation |
|
|
10 / 54 page  PPC405EZ – PowerPC 405EZ Embedded Processor 10 AMCC Proprietary Revision 1.27 - August 22, 2007 Preliminary Data Sheet more details) • Direct 8-bit interfacing to discrete NAND Flash devices • Up to four banks of NAND Flash supported • Device size 4MB-256MB (32Mb to 2Gb) supported • 512B + 16B or 2kB + 64B device page sizes supported • ECC generation - hamming code, single-bit correction, double-bit detection (SEC/DED) • Eight-bit command write, address write, and data read/write • Interrupt on device ready (after long page write or block erase operations) • Boot from NAND – Executes up to 4 KB of boot code out of first block – Automatic page read accesses performed based on device configuration and read address DMA Controller The Direct Memory Access (DMA) controller is a Processor Local Bus (PLB) master that enables faster data transfer between memory and peripherals than is possible under program control. The 4-channel DMA controller handles data transfers between memory and peripherals and from memory-to-memory. Each channel has an independent set of registers needed for data transfer: a control register, a source address register, a destination address register, and a transfer count register. Features include: • Memory-to-memory transfers • Buffered memory-to-peripheral transfers • Buffered peripheral-to-memory transfers • Four independent DMA channels • Scatter/gather capability for dynamically programming multiple DMA transfers • Programmable address increment or decrement • Internal data buffering • Can transfer data to/from any PLB and OPB slave, including OCM and external bus USB Interface The USB support provides separate Host and Device interfaces compliant with the USB1.1 Specification Features include: • USB1.1 Host (2 ports) – Compliant with USB 1.1 Specification and OHCI version 1.0a Host Controller Specification – Compatible with USB 2.0 Full-Speed peripherals – Supports Low-Speed (1.5Mbps) operation – All transfer types (Isochronous, Interrupt, Control, and Bulk) supported – Tx and Rx FIFOs: 16-entries x 32-bits each – Independent 32-bit OPB master and slave interfaces (master and slave can operate asynchronously) – Programmable OPB slave base address – Up to 127 connected devices supported • USB1.1 Device (1 port) – Full- and Low-Speed device controller – 32-bit, OPB slave interface – Three Endpoints supported (Endpoint 0 is used for control) • Endpoints 1–2 can be IN, OUT, IN and OUT, IN/OUT programmable • Endpoints 1–2 configurable to support Interrupt/Bulk only, Isochronous only, Interrupt/Bulk or Isochronous (programmable) transfer types • Endpoints 1–2 configurable to support maximum packet size of 8, 16, 32, or 64 bytes • Endpoint 0 configurable to support maximum packet size of 8 or 16 bytes • Full Speed (12 Mbps) USB PHY for each of the 3 USB ports – Tolerates shorting to 5.25V and shorting to ground if driving signal conditions meet those specified in the |
Similar Part No. - 405EZ |
|
Similar Description - 405EZ |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.NET |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
