CAT5112YI-50-G datasheet(1/11 Pages) CATALYST

Part #	CAT5112YI-50-G

Description	32-Tap Digitally Programmable Potentiometer (DPP?? with Buffered Wiper

Download	11 Pages

Scroll/Zoom	100%

Manufacturer	CATALYST [Catalyst Semiconductor]

Direct Link	http://www.catalyst-semiconductor.com

Logo

1 / 11 page

CAT5112

1

Doc. No. MD-2002 Rev. M

Characteristics subject to change without notice

32-Tap Digitally Programmable Potentiometer (DPP™)

with Buffered Wiper

FEATURES

32-position linear taper potentiometer

Non-volatile EEPROM wiper storage;

buffered wiper

Low power CMOS technology

Single supply operation: 2.5V-6.0V

Increment up/down serial interface

Resistance values: 10kΩ, 50kΩ and 100kΩ

Available in PDIP, SOIC, TSSOP and MSOP

packages

APPLICATIONS

Automated product calibration

Remote control adjustments

Offset, gain and zero control

Tamper-proof calibrations

Contrast, brightness and volume controls

Motor controls and feedback systems

Programmable analog functions

For Ordering Information details, see page 10.

DESCRIPTION

The CAT5112 is a single digitally programmable

potentiometer (DPP™) designed as a electronic

replacement for mechanical potentiometers. Ideal for

automated adjustments on high volume production

lines, they are also well suited for applications where

equipment requiring periodic adjustment is either

difficult to access or located in a hazardous or remote

environment.

The CAT5112 contains a 32-tap series resistor array

connected between two terminals RH and RL. An

up/down counter and decoder that are controlled by

three input pins, determines which tap is connected to

the wiper, RWB. The CAT5112 wiper is buffered by an

op amp that operates rail to rail. The wiper setting,

stored in non-volatile memory, is not lost when the

device is powered down and is automatically recalled

when power is returned. The wiper can be adjusted to

test new system values without effecting the stored

setting.

Wiper-control

of

the

CAT5112

is

accomplished with three input control pins, CS

¯¯ , U/D

¯,

and INC

¯¯¯. The INC

¯¯¯ input increments the wiper in the

direction which is determined by the logic state of the

U/D

¯ input. The CS

¯¯ input is used to select the device

and also store the wiper position prior to power down.

The digitally programmable potentiometer can be

used as a buffered voltage divider. For applications

where the potentiometer is used as a 2-terminal

variable resistor, please refer to the CAT5114. The

buffered wiper of the CAT5112 is not compatible with

that application.

FUNCTIONAL DIAGRAM

Control

and

Memory

Power On Recall

VCC

GND

U/D

INC

CS

RH

RWB

RL

+

–

+

–

Electronic Potentiometer Implementation

Similar Part No. - CAT5112YI-50-G

Manufacturer	Part #	Datasheet	Description
ON Semiconductor	CAT5112YI-50-G	203Kb / 11P	32-Tap Digitally Programmable Potentiometer with Buffered Wiper Doc. No. MD-2002 Rev. N
	CAT5112YI-50-GT3	208Kb / 11P	32-Tap Digitally Programmable Potentiometer (DPP?? with Buffered Wiper Doc. No. MD-2002 Rev. O
	CAT5112YI-50-GT3	162Kb / 10P	32?릘ap Digital Potentiometer (POT) ith Buffered Wiper June, 2013 ??Rev. 16

More results

Similar Description - CAT5112YI-50-G

Manufacturer	Part #	Datasheet	Description
ON Semiconductor	CAT5112	208Kb / 11P	32-Tap Digitally Programmable Potentiometer (DPP?? with Buffered Wiper Doc. No. MD-2002 Rev. O
Catalyst Semiconductor	CAT5111	276Kb / 13P	100-Tap Digitally Programmable Potentiometer (DPP?? with Buffered Wiper
Catalyst Semiconductor	CAT5111	256Kb / 11P	100-Tap Digitally Programmable Potentiometer (DPP?? with Buffered Wiper
ON Semiconductor	CAT5111	253Kb / 13P	100-Tap Digitally Programmable Potentiometer (DPP?? with Buffered Wiper Doc. No. MD-2008 Rev. S
Catalyst Semiconductor	CAT5111	67Kb / 7P	100-Tap Digitally Programmable Potentiometer (DPP) with Buffered Wiper
ON Semiconductor	CAT5112LI-10-G	203Kb / 11P	32-Tap Digitally Programmable Potentiometer with Buffered Wiper Doc. No. MD-2002 Rev. N
Catalyst Semiconductor	CAT5127	245Kb / 13P	32-Tap Digitally Programmable Potentiometer (DPP??
	CAT5112	36Kb / 6P	32-Tap Digitally Programmable Potentiometer (DPP??
	CAT5114	41Kb / 6P	32-Tap Digitally Programmable Potentiometer (DPP)
ON Semiconductor	CAT5127	638Kb / 13P	32-Tap Digitally Programmable Potentiometer (DPP?? Doc. No. MD-2127 Rev. E

More results

CAT5112YI-50-G Datasheet(PDF) 1 Page - Catalyst Semiconductor

CAT5112YI-50-G Datasheet(HTML) 1 Page - Catalyst Semiconductor

Similar Part No. - CAT5112YI-50-G

Similar Description - CAT5112YI-50-G

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Datasheet Download

Link URL