Electronic Components Datasheet Search |
|
STR710FZ2T6 Datasheet(PDF) 6 Page - STMicroelectronics |
|
STR710FZ2T6 Datasheet(HTML) 6 Page - STMicroelectronics |
6 / 77 page System architecture STR71xF 6/77 4 System architecture Package Choice: Low Pin-Count 64-pin or Feature-Rich 144-pin LQFP or BGA The STR710 family is available in 5 main versions. The 144-pin versions have the full set of all features including CAN, USB and External Memory Interface (EMI). ● STR710F: 144-pin BGA or LQFP with CAN, USB and EMI ● STR710R: Flashless 144-pin BGA or LQFP with CAN, USB and EMI (no internal Flash memory) The three 64-pin versions (BGA or LQFP) do not include External Memory Interface. ● STR715F: 64-pin BGA or LQFP without CAN or USB ● STR711F: 64-pin BGA or LQFP with USB ● STR712F: 64-pin BGA or LQFP with CAN High Speed Flash Memory (STR71xF) The Flash program memory is organized in two banks of 32-bit wide Burst Flash memories enabling true read-while-write (RWW) operation. Device Bank 0 is up to 256 Kbytes in size, typically for the application program code. Bank 1 is 16K bytes, typically used for storing data constants. Both banks are accessed by the CPU with zero wait states @ 33 MHz Bank 0 memory endurance is 10K write/erase cycles and Bank 1 endurance is 100K write/erase cycles. Data retention is 20 years at 85°C on both banks. The two banks can be accessed independently in read or write. Flash memory can be accessed in two modes: ● Burst mode: 64-bit wide memory access at up to 50 MHz. ● Direct 32-bit wide memory access for deterministic operation at up to 33 MHz. The STR7 embedded Flash memory can be programmed using In-Circuit Programming or In-Application programming. IAP (In-Application Programming): The IAP is the ability to re-program the Flash memory of a microcontroller while the user program is running. ICP (In-Circuit Programming): The ICP is the ability to program the Flash memory of a microcontroller using JTAG protocol while the device is mounted on the user application board. The Flash memory can be protected against different types of unwanted access (read/write/erase). There are two types of protection: ● Sector Write Protection ● Flash Debug Protection (locks JTAG access) Refer to the STR7 Flash Programming Reference manual for details. Optional External Memory (STR710) The non-multiplexed 16-bit data/24-bit address bus available on the STR710 (144-pin) supports four 16-Mbyte banks of external memory. Wait states are programmable individually for each bank allowing different memory types (Flash, EPROM, ROM, SRAM etc.) to be used to store programs or data. Figure 1 shows the general block diagram of the device family. |
Similar Part No. - STR710FZ2T6 |
|
Similar Description - STR710FZ2T6 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |