Standby Mode

While in standby mode, the supply current is reduced

to less than 1mA (typ). The next falling edge of CS with

R/C low causes the MAX1065/MAX1066 to exit standby

mode and begin acquisition. The reference and refer-

ence buffer remain active to allow quick turn-on time.

Standby mode allows significant power savings while

running at the maximum sample rate.

Shutdown Mode

In shutdown mode, the reference and reference buffer

are shut down between conversions. Shutdown mode

reduces supply current to 0.5µA (typ) immediately after

the conversion. The falling edge of CS with R/C low

causes the reference and buffer to wake up and enter

acquisition mode. To achieve 14-bit accuracy, allow

reference to wake up. Increase wakeup time propor-

Internal and External Reference

Internal Reference

The internal reference of the MAX1065/MAX1066 is

internally buffered to provide 4.096V (typ) output at

REF. Bypass REF to AGND and REFADJ to AGND with

1µF and 0.1µF respectively. Fine adjustments can be

made to the internal reference voltage by sinking or

sourcing current at REFADJ. The input impedance at

REFADJ is nominally 5k

Ω. The internal reference volt-

age is adjustable to ±1.5% with the circuit of Figure 7.

External Reference

An external reference can be placed at either the input

(REFADJ) or the output (REF) of the MAX1065/

MAX1066’s internal buffer amplifier. When connecting

an external reference to REFADJ, the input impedance

is typically 5k

Ω. Using the buffered REFADJ input

makes buffering the external reference unnecessary;

however, the internal buffer output must be bypassed

at REF with a 1µF capacitor.

Directly drive REF using an external reference. During

conversion, the external reference must be able to

drive 100µA of DC load current and have an output

impedance of 10

Ω or less. REFADJ’s impedance is typ-

ically 5k

Ω. The DC input impedance of REF is 40kΩ

minimum.

For optimal performance, buffer the reference through

an op amp and bypass REF with a 1µF capacitor.

Consider the MAX1065/MAX1066’s equivalent input

Low-Power, 14-Bit Analog-to-Digital Converters

with Parallel Interface

10

______________________________________________________________________________________

AUTO-ZERO

RAIL

CAPACITIVE DAC

REF

AGND

TRACK

HOLD

HOLD

TRACK

ZERO

800

Ω

AIN

3pF

Figure 4. Equivalent Input Circuit

CS

R/C

EOC

REF

AND

BUFFER

REF POWER-

DOWN BIT

ACQUISITION

CONVERSION

DATA

OUT

Figure 5. Selecting Standby Mode

CS

EOC

REF

AND

BUFFER

REF POWER-

DOWN BIT

ACQUISITION

CONVERSION

DATA

OUT

R/C

Figure 6. Selecting Shutdown Mode