Electronic Components Datasheet Search |
|
PCJ0E122MCL1GS Datasheet(PDF) 1 Page - Nichicon corporation |
|
PCJ0E122MCL1GS Datasheet(HTML) 1 Page - Nichicon corporation |
1 / 2 page CJ Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105 °C. SMD type : Lead free reflow soldering condition at 260 °C peak correspondence. Adapted to the RoHS directive (2002/95/EC). series –55 ~ +105 °C 2.5 ~ 16V 39 ~ 2700 µF ± 20% at 120Hz, 20°C Not more than value of Standard ratings at 120Hz, 20 °C Not more than value of Standard ratings at 100kHz, 20 °C Not more than value of Standard ratings. After 2 minute's application of rated voltage. 20 °C Z +105 °C / Z+20°C 1.25 (100kHz) Z-55 °C / Z + 20°C 1.25 After 2000 hours' application of rated voltage at 105 °C, capacitors meet the specified value for life characteristics listed at right. After 1000 hours' application of rated voltage at 60 °C 90%RH, capacitors meet the specified value for life characteristics listed at right. To comply with recommended conditions for reflow soldering. Pre-heating shall be done at 150 ~ 200 °C and for 60 ~ 180 sec. In the case of peak temp, less than 250 °C, reflow soldering shall be within two times. In the case of peak temp, less than 260 °C, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Navy blue print on the case top. CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS 1 ESR measurements should be made at a point on the terminal nearest where the ternimals protrude through the plastic platform. 2 Conditioning : If there is doubt about the measured result, measurement should be made again after the rated voltage is applied for 120 minutes at the temperature of 105 °C. 3 Initial value : The value before test of examination of resistance to soldering. Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance tan δ ESR ( 1) Leakage Current ( 2) Characteristics of Temperature Impedance Ratio Endurance Damp Heat Resistance to Soldering Heat Marking Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Initial specified value or less Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Initial specified value or less Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 10% of initial value ( 3) 130% or less of the initial specified value 130% or less of the initial specified value Initial specified value or less Specifications Higher Capacitance, Low ESR CF CJ Higher Capacitance, Low ESR |
Similar Part No. - PCJ0E122MCL1GS |
|
Similar Description - PCJ0E122MCL1GS |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |