VCC6-L Output Frequencies > 270MHz

Vectron International 267 Lowell Rd, Hudson NH 03051

Tel: 1-88-VECTRON-1

e-mail: vectron@vectron.com

Reliability

The VCC6 qualification tests include the following:

Table 6. Environnemental Compliance

Parameter

Conditions

Mechanical Shock

MIL-STD-883 Method 2002

Mechanical Vibration

MIL-STD-883 Method 2007

Solderability

MIL-STD-883 Method 2003

Gross and Fine Leak

MIL-STD-883 Method 1014

Resistance to Solvents

MIL-STD-883 Method 2016

Moisture Sensitivity Level

MSL1

Handling Precautions

Although ESD protection circuitry has been designed into the the VCC6, proper precautions should be taken

when handling and mounting. VI employs a Human Body Model and a Charged-Device Model (CDM) for

ESD susceptibility testing and design protection evaluation. ESD thresholds are dependent on the circuit

parameters used to define the model. Although no industry wide standard has been adopted for the CDM, a

standard HBM of resistance = 1.5kohms and capacitance = 100pF is widely used and therefore can be

used for comparison purposes.

Table 7. ESD Ratings

Model

Minimum

Conditions

Human Body Model

1000

MIL-STD-883 Method 3115

Charged Device Model

1000

JESD 22-C101

Suggested IR profile

Table 8 shows max temperatures and lower temperatures can also be used e.g. peak temperature of 220C.

Termination finish is gold over nickel. The VCC6 is hermetically sealed so an aqueous wash is not an issue.

Table 8. Reflow Profile

Parameter

Symbol

Value

PreHeat Time

60 sec Min, 180 sec Max

Ramp Up

3

Time Above 217

60 sec Min, 150 sec Max

Time To Peak Temperature

480 sec Max

Time At 260

15 sec Max

Ramp Down

6