5962-0721301QXC datasheet(5/5 Pages) INTERSIL | 500MHz Rail-to-Rail Amplifiers

5 page

FN6478.1

October 17, 2007

14 ld FLATPACK Package Outline Drawing

NOTES:

1. Index area: A notch or a pin one identification mark shall be locat-

ed adjacent to pin one and shall be located within the shaded

area shown. The manufacturer’s identification shall not be used

as a pin one identification mark. Alternately, a tab (dimension k)

may be used to identify pin one.

2. If a pin one identification mark is used in addition to a tab, the lim-

its of dimension k do not apply.

3. This dimension allows for off-center lid, meniscus, and glass

overrun.

4. Dimensions b1 and c1 apply to lead base metal only. Dimension

M applies to lead plating and finish thickness. The maximum lim-

its of lead dimensions b and c or M shall be measured at the cen-

troid of the finished lead surfaces, when solder dip or tin plate

lead finish is applied.

5. N is the maximum number of terminal positions.

6. Measure dimension S1 at all four corners.

7. For bottom-brazed lead packages, no organic or polymeric mate-

rials shall be molded to the bottom of the package to cover the

leads.

8. Dimension Q shall be measured at the point of exit (beyond the

meniscus) of the lead from the body. Dimension Q minimum

shall be reduced by 0.0015 inch (0.038mm) maximum when sol-

der dip lead finish is applied.

9. Dimensioning and tolerancing per ANSI Y14.5M - 1982.

10. Controlling dimension: INCH.

-D-

-C-

0.004

H A - B

-A-

-B-

0.036

H A - B

SEATING AND

BASE PLANE

-H-

(c)

(b)

SECTION A-A

BASE

LEAD FINISH

METAL

PIN NO. 1

ID AREA

K14.A MIL-STD-1835 CDFP3-F14 (F-2A, CONFIGURATION B)

14 LEAD CERAMIC METAL SEAL FLATPACK PACKAGE

SYMBOL

INCHES

MILLIMETERS

NOTES

MIN

MAX

MIN

MAX

0.045

0.115

1.14

2.92

0.015

0.022

0.38

0.56

0.015

0.019

0.38

0.48

0.004

0.009

0.10

0.23

0.004

0.006

0.10

0.15

0.390

9.91

0.235

0.260

5.97

6.60

-0.290

-7.11

0.125

3.18

0.030

0.76

0.050 BSC

1.27 BSC

0.008

0.015

0.20

0.38

0.270

0.370

6.86

9.40

0.026

0.045

0.66

1.14

0.005

0.13

0.0015

0.04

N14

Rev. 0 5/18/94

5962-0721301QXC, 5962-0721302QXC, 5962-0721303QYC

Part Number	Components Description	Html View	Manufacturer
5962-0623501QPC	500MHz Rail-to-Rail Amplifiers	1 2 3 4	Intersil Corporation
5962-0721301QHC	500MHz Rail-to-Rail Amplifiers	1 2 3 4 5 More	Intersil Corporation
EL8102_05	500MHz Rail-to-Rail Amplifiers	1 2 3 4 5 More	Intersil Corporation
EL8403	500MHz Rail-to-Rail Amplifiers	1 2 3 4 5 More	Intersil Corporation
AD8051_06	Low Cost High Speed Rail-to-Rail Amplifiers	1 2 3 4 5 More	Analog Devices
EL8170	Micropower Single Supply Rail-to-Rail Input-Output Instrumentation Amplifiers	1 2 3 4 5 More	Intersil Corporation
TLV2460_07	FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH SHUTDOWN	1 2 3 4 5 More	Texas Instruments
TSV321_07	General purpose input/output rail-to-rail low power operational amplifiers	1 2 3 4 5 More	STMicroelectronics
OPA347_07	microPower Rail-to-Rail Operational Amplifiers	1 2 3 4 5 More	Texas Instruments
ISL59483	Dual 500MHz Triple Multiplexing Amplifiers	1 2 3 4 5 More	Intersil Corporation

Related Electronics Part Number

Link URL

Sponsor of Alldatasheet