IP113M LF
Preliminary Data Sheet
9/58
April 9, 2007
Copyright © 2004, IC Plus Corp.
IP113M LF-DS-R11
PIN Description (continued)
Pin no.
Label
Type
Description
LED pins
31
LED_TP_LINK
O
TP port link LED
On: link ok,
Off: link fail,
Flash: link ok & activity
(Flash: on for 20ms and off for 80ms)
33
LED_TP_SPD
O
TP port speed LED
On: 100M,
Off: 10M
32
LED_TP_FDX
O
TP port full duplex LED
On: full,
Off: half,
Flash: half & collision happens
(Flash: on for 20ms and off for 80ms)
36
LED_FX_LINK
O
Fiber port link LED
On: link ok,
Off: link fail,
Flash: link ok & activity
(Flash: on for 20ms and off for 80ms)
37
LED_FX_FDX
O
Fiber port full duplex LED
On: full,
Off: half,
Flash: half & collision happens
(Flash: on for 20ms and off for 80ms)
38
LED_FX_SD
O
Fiber port signal detect
On: FXSD is active,
Off: FXSD is inactive
30
LED_FX_FEF_DET
O
Far end fault pattern received
Far End Fault Pattern received:
LED On: 80ms, LED Off: 20ms
Far End Fault Pattern not Receive:
LED is always off
LED for link status of TP port of remote IP113M LF
Pin 3 AUTO_TEST = 0
Pin 3 AUTO_TEST = 1
29
LED_RMT_TP_LINK
O
On: link ok,
Off: link fail
Flash
(On: 80ms, Off: 20ms)
LED for speed of TP port of remote IP113M LF
Pin 3 AUTO_TEST = 0
Pin 3 AUTO_TEST = 1
25
LED_RMP_TP_SPD
O
On: 100M,
Off: 10M
On: loop back test complete,
Off: under loop back test
LED for full duplex of TP port of remote IP113M LF
Pin 3 AUTO_TEST = 0
Pin 3 AUTO_TEST = 1
24
LED_RMT_TP_FDX
O
On: full duplex,
Off: half duplex
On: loop back test result is ok,
Off: loop back test result fails
Note: The output of LED pin is logic low when the LED is on.