Page 5 of 5

CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the

environment. For safety, observe the following procedures:

Do not ingest.

Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these

by-products are dangerous to the human body if inhaled, ingested, or swallowed.

Observe government laws and company regulations when discarding this product. This product must be discarded in

accordance with methods specified by applicable hazardous waste procedures.

- Mimix Broadband's products are not authorized for use as critical components in life support devices or

systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life

support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain

life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be

reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or

system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its

safety or effectiveness.

Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible

with high volume solder installation. The package is a low-cost plastic package. Vacuum tools or other suitable pick and place

equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder

connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF

performance degradation, but reduced reliability and life of the product due to thermal stress.

Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental

requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant

components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is

100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as

well as higher temperature (260°C reflow) “Pb Free” processes.

XX1001-QK-0L00

Ni/Pd/Au plated RoHS compliant QFN 7x7 28L surface mount package in bulk quantity

XX1001-QK-0L0T

Ni/Pd/Au plated RoHS compliant QFN 7x7 28L surface mount package in tape and reel

XX1001-QK-EV1

XX1001-QK Evaluation Module

Reflow Profile

Ramp Up Rate

Activation Time and Temperature

Time Above Melting Point

Max Peak Temperature

Time Within 5 ºC of Peak

Ramp Down Rate

SnPb

3-4 ºC/sec

60-120 sec @ 140-160 ºC

60-150 sec

240 ºC

10-20 sec

4-6 ºC/sec

Pb Free

3-4 ºC/sec

60-180 sec @ 170-200 ºC

60-150 sec

265 ºC

10-20 sec

4-6 ºC/sec

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099

Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com

Characteristic Data and Specifications are subject to change without notice.

©2007 Mimix Broadband, Inc.

Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept

their obligation to be compliant with U.S. Export Laws.

March 2007 - Rev 07-Mar-07

X1001-QK

18.0-21.0/36.0-42.0 GHz Doubler and

Power Amplifier, QFN, 7x7mm