CY7C1511AV18, CY7C1526AV18
CY7C1513AV18, CY7C1515AV18
Document Number: 001-06985 Rev. *C
Page 11 of 31
Write Cycle Descriptions
The write cycle description table for CY7C1511AV18 and CY7C1513AV18 follows. [2, 10]
BWS0/
NWS0
BWS1/
NWS1
K
K
Comments
L
L
L–H
–
During the data portion of a write sequence
:
CY7C1511AV18
− both nibbles (D
[7:0]) are written into the device,
CY7C1513AV18
− both bytes (D
[17:0]) are written into the device.
L
L
–
L-H During the data portion of a write sequence
:
CY7C1511AV18
− both nibbles (D
[7:0]) are written into the device,
CY7C1513AV18
− both bytes (D
[17:0]) are written into the device.
L
H
L–H
–
During the data portion of a write sequence
:
CY7C1511AV18
− only the lower nibble (D
[3:0]) is written into the device, D[7:4] remains unaltered.
CY7C1513AV18
− only the lower byte (D
[8:0]) is written into the device, D[17:9] remains unaltered.
L
H
–
L–H During the data portion of a write sequence
:
CY7C1511AV18
− only the lower nibble (D
[3:0]) is written into the device, D[7:4] remains unaltered.
CY7C1513AV18
− only the lower byte (D
[8:0]) is written into the device, D[17:9] remains unaltered.
H
L
L–H
–
During the data portion of a write sequence
:
CY7C1511AV18
− only the upper nibble (D
[7:4]) is written into the device, D[3:0] remains unaltered.
CY7C1513AV18
− only the upper byte (D
[17:9]) is written into the device, D[8:0] remains unaltered.
H
L
–
L–H During the data portion of a write sequence
:
CY7C1511AV18
− only the upper nibble (D
[7:4]) is written into the device, D[3:0] remains unaltered.
CY7C1513AV18
− only the upper byte (D
[17:9]) is written into the device, D[8:0] remains unaltered.
H
H
L–H
–
No data is written into the devices during this portion of a write operation.
H
H
–
L–H No data is written into the devices during this portion of a write operation.
Write Cycle Descriptions
The write cycle description table for CY7C1526AV18 follows. [2, 10]
BWS0
KK
L
L–H
–
During the Data portion of a write sequence, the single byte (D[8:0]) is written into the device.
L
–
L–H
During the Data portion of a write sequence, the single byte (D[8:0]) is written into the device.
H
L–H
–
No data is written into the device during this portion of a write operation.
H
–
L–H
No data is written into the device during this portion of a write operation.
Note
10. Is based on a write cycle that was initiated in accordance with the Write Cycle Descriptions table. NWS0, NWS1, BWS0, BWS1, BWS2, and BWS3 can be altered on
different portions of a write cycle, as long as the setup and hold requirements are achieved.
[+] Feedback