Quad HOTLink II™ Transceiver
CYV15G0401DXB
CYP15G0401DXB
CYW15G0401DXB
Cypress Semiconductor Corporation
•
3901 North First Street
•
San Jose
, CA 95134
•
408-943-2600
Document #: 38-02002 Rev. *L
Revised March 30, 2005
Features
• Second-generation HOTLink® technology
• Compliant to multiple standards
— ESCON, DVB-ASI, Fibre Channel and Gigabit
Ethernet (IEEE802.3z)
— CPRI™ compliant
— CYW15G0401DXB compliant to OBSAI-RP3
— CYV15G0401DXB compliant to SMPTE 259M and
SMPTE 292M
— 8B/10B encoded or 10-bit unencoded data
• Quad channel transceiver operates from 195 to
1500 MBaud serial data rate
— CYW15G0401DXB operates from 195 to 1540 MBaud
— Aggregate throughput of 12 GBits/second
• Selectable parity check/generate
• Selectable multi-channel bonding options
— Four 8-bit channels
— Two 16-bit channels
— One 32-bit channel
— N x 32-bit channel support (inter-chip)
• Skew alignment support for multiple bytes of offset
• Selectable input/output clocking options
• MultiFrame™ Receive Framer
— Bit and Byte alignment
— Comma or full K28.5 detect
— Single- or multi-byte framer for byte alignment
— Low-latency option
• Synchronous LVTTL parallel interface
• Optional Elasticity Buffer in Receive Path
• Optional Phase Align Buffer in Transmit Path
• Internal phase-locked loops (PLLs) with no external
PLL components
• Dual differential PECL-compatible serial inputs per
channel
— Internal DC-restoration
• Dual differential PECL-compatible serial outputs per
channel
— Source matched for 50
Ω transmission lines
— No external bias resistors required
— Signaling-rate controlled edge-rates
• Compatible with
— fiber-optic modules
— copper cables
— circuit board traces
• JTAG boundary scan
• Built-In Self-Test (BIST) for at-speed link testing
• Per-channel Link Quality Indicator
— Analog signal detect
— Digital signal detect
• Low power 2.5W @ 3.3V typical
• Single 3.3V supply
• 256-ball thermally enhanced BGA
• Pb-free package option available
• 0.25
µ BiCMOS technology
Functional Description
The CYP(V)15G0401DXB[1] Quad HOTLink II™ Transceiver
is a point-to-point or point-to-multipoint communications
building block allowing the transfer of data over high-speed
serial links (optical fiber, balanced, and unbalanced copper
transmission lines) at signaling speeds ranging from
195-to-1500 MBaud per serial link.
Note:
1.
CYV15G0401DXB refers to SMPTE 259M and SMPTE 292M compliant devices. CYW15G0401DXB refers to OBSAI RP3 compliant devices (maximum
operating data rate is 1540 MBaud). CYP15G0401DXB refers to devices not compliant to SMPTE 259M and SMPTE 292M pathological test requirements and
also OBSAI RP3 operating datarate of 1536 MBaud. CYP(V)(W)15G0401DXB refers to all three devices.
Figure 1. HOTLink II System Connections
Serial Links
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Serial Links
Serial Links
Serial Links
Backplane or
Cabled
Connections
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
