7 / 9 page
JNPS-0846
8
6. QUALITY PERFORMANCE
6-1 RATING
ITEM
RATING
CURRENT
VOLTAGE
TEMPERATURE
1.0A Max.
AC: 250V Max. / DC: 300V Max.
-55
°C ~ 105°C
6-2 PHYSICAL SPECIFICATIONS
* The value in ( ) is reference
.
TEST
DESCRIPTION
REQUIREMENT
TEST CONDITION
RELATED
STANDARD
VIBRATION
Electrical discontinuity:
Less than 1µs
Sweep Freq.: 10
∼55Hz, Amplitude:
1.52mm(or 98 m/s2), Sweep Cycle:
1min., Sweep time: 2 hours Sweep in
each direction: (X,Y,Z)
MIL-STD-
202F 101A
MECHANICAL
SHOCK
Electrical discontinuity:
Less than 1µs
490 m/s2, 11ms, Half sine shock pulse.
3 times / X,Y,Z directions (Total 18
times)
MIL-STD-
202E 213B
SOLDERABILITY
Wetting: 95% Min.
or
Zero cross time:
3 seconds Max.
Solder: Sn-3Ag-0.5Cu
- Wetting Measurement:
245
°C, 3 seconds
- Wetting Balance Method:
245
°C
JNTM-0039
JIS C 0050
SOLDERING HEAT
RESISTANCE
Connector should not have
any defect portions after test.
Dip soldering:
260
°C, 10 seconds, 2 times or
263
°C, 5 seconds, 2 times
* without Pre-heating
Soldering Iron:
Dependence on soldering conditions.
* It need the evaluation
under actual conditions.
JNTM-0040