M25PX64-VME6E datasheet(9/66 Pages) NUMONYX

Part #	M25PX64-VME6E

Description	64-Mbit, dual I/O, 4-Kbyte subsector erase, serial flash memory with 75 MHz SPI bus interface

Download	66 Pages

Scroll/Zoom	100%

Manufacturer	NUMONYX [Numonyx B.V]

Direct Link	http://www.numonyx.com

Logo

9 / 66 page

M25PX64

Signal descriptions

9/66

2

Signal descriptions

2.1

Serial data output (DQ1)

This output signal is used to transfer data serially out of the device. Data are shifted out on

the falling edge of Serial Clock (C).

During the dual input fast program (DIFP) instruction, pin DQ1 is used as an input. It is

latched on the rising edge of the Serial Clock (C).

2.2

Serial data input (DQ0)

This input signal is used to transfer data serially into the device. It receives instructions,

addresses, and the data to be programmed. Values are latched on the rising edge of Serial

Clock (C).

During the dual output fast read (DOFR) instruction, pin DQ0 is used as an output. Data are

shifted out on the falling edge of the Serial Clock (C).

2.3

Serial Clock (C)

This input signal provides the timing of the serial interface. Instructions, addresses, or data

present at serial data input (DQ0) are latched on the rising edge of Serial Clock (C). Data on

serial data output (DQ1) changes after the falling edge of Serial Clock (C).

2.4

Chip Select (S)

When this input signal is High, the device is deselected and serial data output (DQ1) is at

high impedance. Unless an internal program, erase or write status register cycle is in

progress, the device will be in the standby power mode (this is not the deep power-down

mode). Driving Chip Select (S) Low enables the device, placing it in the active power mode.

After power-up, a falling edge on Chip Select (S) is required prior to the start of any

instruction.

2.5

Hold (HOLD)

The Hold (HOLD) signal is used to pause any serial communications with the device without

deselecting the device.

During the hold condition, the serial data output (DQ1) is high impedance, and serial data

input (DQ0) and Serial Clock (C) are don’t care.

To start the hold condition, the device must be selected, with Chip Select (S) driven Low.

Similar Part No. - M25PX64-VME6E

Manufacturer	Part #	Datasheet	Description
Micron Technology	M25PX64-VME6G	755Kb / 56P	Micron M25PX64 Serial Flash Embedded Memory

More results

Similar Description - M25PX64-VME6E

Manufacturer	Part #	Datasheet	Description
Numonyx B.V	M25PX64-VMF6TP	1Mb / 70P	64-Mbit, dual I/O, 4-Kbyte subsector erase, serial flash memory with 75 MHz SPI bus interface
Micron Technology	M25PX16SOVZM6TP	1Mb / 65P	16-Mbit, dual I/O, 4-Kbyte subsector erase, serial Flash memory with 75 MHz SPI bus interface
STMicroelectronics	M25PX32	550Kb / 63P	32-Mbit, dual I/O, 4-Kbyte subsector erase, serial Flash memory with 75 MHz SPI bus interface
Numonyx B.V	M25PX16-VMN6TP	1Mb / 65P	16-Mbit, dual I/O, 4-Kbyte subsector erase, serial Flash memory with 75 MHz SPI bus interface
Numonyx B.V	M25PX32	1Mb / 65P	32-Mbit, dual I/O, 4-Kbyte subsector erase, serial Flash memory with 75 MHz SPI bus interface
Micron Technology	N25Q032A13E1241F	5Mb / 153P	32-Mbit 3 V, multiple I/O, 4-Kbyte subsector erase, XiP enabled, serial flash memory with 108 MHz SPI bus interface
Numonyx B.V	N25Q128	5Mb / 185P	128-Mbit, 1.8 V, multiple I/O, 4-Kbyte subsector erase on boot sectors, XiP enabled, serial flash memory with 108 MHz SPI bus interface
Numonyx B.V	N25Q128	5Mb / 180P	128-Mbit 3 V, multiple I/O, 4-Kbyte subsector erase on boot sectors,XiP enabled, serial flash memory with 108 MHz SPI bus interface
Micron Technology	N25Q128A11B1241F	5Mb / 185P	128-Mbit, 1.8 V, multiple I/O, 4-Kbyte subsector erase on boot sectors, XiP enabled, serial flash memory with 108 MHz SPI bus interface
Numonyx B.V	M25P64-VMF6TPBA	1Mb / 55P	64 Mbit, low voltage, Serial Flash memory with 75 MHz SPI bus interface

More results

M25PX64-VME6E Datasheet(PDF) 9 Page - Numonyx B.V

M25PX64-VME6E Datasheet(HTML) 9 Page - Numonyx B.V

Similar Part No. - M25PX64-VME6E

Similar Description - M25PX64-VME6E

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

Datasheet Download

Link URL