Electronic Components Datasheet Search |
|
SP5669 Datasheet(PDF) 1 Page - Mitel Networks Corporation |
|
SP5669 Datasheet(HTML) 1 Page - Mitel Networks Corporation |
1 / 12 page ORDERING INFORMATION SP5669/KG/MP1S (Tubes) SP5669/KG/MP1T (Tape and reel) The SP5669 is a single chip frequency synthesiser designed for tuning systems up to 2.7GHz and offers step size compatible with DTT offset requirements. The RF preamplifier drives a divide by two prescaler which can be disabled for applications up to 2GHz, allowing direct interfacing with the programmable divider so enabling a step size equal to the comparison frequency. For applications up to 2.7GHz the divide by two is enabled, giving a step size of twice the comparison frequency. The comparison frequency is obtained either from an on– chip crystal controlled oscillator, or from an external source. The oscillator frequency F ref or the comparison frequency F comp may be switched to the REF/COMP output. This feature is ideally suited to providing the reference frequency for a second synthesiser such as in a double conversion tuner (see Fig. 8). The synthesiser is controlled via an I 2 C bus, and responds to one of four programmable addresses which are selected by applying a specific voltage to the ‘address’ input. This feature enables two or more synthesisers to be used in a system. The device contains four switching ports P0–P3 and a 5–level ADC. The output of the ADC can be read via the I 2 C bus. The device also contains a varactor line disable and charge pump disable facility. Fig.1 Pin connections - top view FEATURES s Complete 2.7GHz single chip system s Compatible with UK DTT offset requirements s Optimised for low phase noise s Selectable divide by two prescaler s Selectable reference division ratio s Selectable reference/comparison frequency output s Selectable charge pump current s Four selectable I2C bus address s 5–level ADC s Pin compatible with the SP5658 3–wire bus controlled synthesiser and SP5659 I2C bus synthesiser and SP5659 I2C bus synthesiser s ESD protection; (Normal ESD handling procedures should be observed) APPLICATIONS s SAT, TV, VCR and Cable tuning systems 116 1 MP16 CHARGE PUMP CRYSTAL REF/COMP ADDRESS SDA SCL PORT P3 PORT P2 DRIVE Vee RF INPUT RF INPUT Vcc ADC PORT P0 PORT P1 2 3 4 5 6 7 89 10 11 12 13 14 15 APPLICATIONS s Complete 2.7GHz single chip system s Optimised for low phase noise SP5669 2.7GHz I2C Bus Controlled Synthesiser Preliminary Information DS4852 - 1.4 November 1997 |
Similar Part No. - SP5669_97 |
|
Similar Description - SP5669_97 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |