M27V160-150XM6TR datasheet(4/15 Pages) STMICROELECTRONICS

Part #	M27V160-150XM6TR

Description	16 Mbit (2Mb x8 or 1Mb x16) Low Voltage UV EPROM and OTP EPROM

Download	15 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

4 / 15 page

M27V160

4/15

Standby Mode

The M27V160 has a standby mode which reduces

the active current from 20mA to 20

µA with low volt-

age operation VCC ≤ 3.6V, see Read Mode DC

Characteristics table for details.The M27V160 is

placed in the standby mode by applying a CMOS

high signal to the E input. When in the standby

mode, the outputs are in a high impedance state,

independent of the G input.

Two Line Output Control

Because EPROMs are usually used in larger

memory arrays, this product features a 2 line con-

trol function which accommodates the use of mul-

tiple memory connection. The two line control

function allows:

a. the lowest possible memory power dissipation,

b. complete assurance that output bus contention

will not occur.

For the most efficient use of these two control

lines, E should be decoded and used as the prima-

ry device selecting function, while G should be

made a common connection to all devices in the

array and connected to the READ line from the

system control bus. This ensures that all deselect-

ed memory devices are in their low power standby

mode and that the output pins are only active

when data is required from a particular memory

device.

Table 5. AC Measurement Conditions

High Speed

Standard

Input Rise and Fall Times

≤ 10ns

≤ 20ns

Input Pulse Voltages

0 to 3V

0.4V to 2.4V

Input and Output Timing Ref. Voltages

1.5V

0.8V and 2V

Figure 3. AC Testing Input Output Waveform

AI01822

3V

High Speed

0V

1.5V

2.4V

Standard

0.4V

2.0V

0.8V

Figure 4. AC Testing Load Circuit

AI01823B

1.3V

OUT

CL

CL = 30pF for High Speed

CL = 100pF for Standard

CL includes JIG capacitance

3.3k

Ω

1N914

DEVICE

UNDER

TEST

Table 6. Capacitance (1) (TA =25 °C, f = 1 MHz)

Note: 1. Sampled only, not 100% tested.

Symbol

Parameter

Test Condition

Min

Max

Unit

CIN

Input Capacitance (except BYTEVPP)VIN =0V

10

pF

Input Capacitance (BYTEVPP)VIN =0V

120

pF

COUT

Output Capacitance

VOUT =0V

12

pF

Similar Part No. - M27V160-150XM6TR

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	M27V160-150XM6	238Kb / 25P	16 Mbit (2Mb x8 or 1Mb x16) Low Voltage UV EPROM and OTP EPROM

More results

Similar Description - M27V160-150XM6TR

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	M27C160	187Kb / 19P	16 Mbit 2Mb x8 or 1Mb x16 UV EPROM and OTP EPROM
	M27V160	238Kb / 25P	16 Mbit (2Mb x8 or 1Mb x16) Low Voltage UV EPROM and OTP EPROM
	M27V800	108Kb / 16P	8 Mbit 1Mb x8 or 512Kb x16 Low Voltage UV EPROM and OTP EPROM
	M27C800	171Kb / 18P	8 Mbit 1Mb x8 or 512Kb x16 UV EPROM and OTP EPROM
	M27W801	202Kb / 24P	8 Mbit 1Mb x8 Low Voltage UV EPROM and OTP EPROM
	M27V801	108Kb / 16P	8 Mbit 1Mb x8 Low Voltage UV EPROM and OTP EPROM
	M27W801	108Kb / 16P	8 Mbit 1Mb x8 Low Voltage UV EPROM and OTP EPROM
	M27V322	112Kb / 13P	32 Mbit (2Mb x16) Low Voltage UV EPROM and OTP EPROM March 2000
	M27C322	112Kb / 13P	32 Mbit (2Mb x16) UV EPROM and OTP EPROM April 2000
	M27C322	196Kb / 24P	32 Mbit (2Mb x16) UV EPROM and OTP EPROM

More results

M27V160-150XM6TR Datasheet(PDF) 4 Page - STMicroelectronics

M27V160-150XM6TR Datasheet(HTML) 4 Page - STMicroelectronics

Similar Part No. - M27V160-150XM6TR

Similar Description - M27V160-150XM6TR

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Datasheet Download

Link URL