THS1401-EP THS1403-EP THS1408-EP

14-BIT, 1/3/8 MSPS DSP COMPATIBLE ANALOG-TO-DIGITAL CONVERTERS

WITH INTERNAL REFERENCE AND PGA

SGLS129A – JULY 2002 – REVISED NOVEMBER 2002

7

POST OFFICE BOX 655303

PARAMETER MEASUREMENT INFORMATION

sample timing

The THS1401/3/8 core is based on a pipeline architecture with a latency of 9.5 samples. The conversion results

appear on the digital output 9.5 clock cycles after the input signal was sampled.

S9

S10

S11

S12

CLK

Data

Out

Analog

Input

C1

C2

C3

tw(CLK)

tw(CLK)

td

Figure 1. Sample Timing

The parallel interface of the THS1401/3/8 ADC features 3-state buffers, making it possible to directly connect it to

a data bus. The output buffers are enabled by driving the OE input low.

Besides the sample results, it is also possible to read back the values of the control register, the PGA register, and

the offset register. Which register is read is determined by the address inputs A[1,0]. The ADC results are available

at address 0.

The timing of the control signals is described in the following sections.