Electronic Components Datasheet Search |
|
PSPRL9802D Datasheet(PDF) 1 Page - Wall Industries,Inc. |
|
PSPRL9802D Datasheet(HTML) 1 Page - Wall Industries,Inc. |
1 / 3 page Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSPRL9802D Series Active PFC 200 Watt Dual Output AC/DC Switching Power Supply FEATURES ● 2 Year Warranty ● Optional Top Cover ● 90 ~ 264VAC Universal AC Input ● Approved to UL CUL TUV CE and CB ● Power Factor Corrected to EN61000-3-2 Class D ● 5V/ 12V/ 24V Dual Output Optional Combinations ● Compact 1U Size & Power Density: 5.2 Watts/cu in. ● Convection-Cooled and with Forced Air Cooling Rating Options SPECIFICATIONS: PSPRL9802D Series All specifications are based on 25 oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage 90 – 264VAC Full Range Input Frequency 47 to 63Hz Input Current 4A at 100VAC full load Inrush Current 35A max @ 110VAC with full load and cold start. Leakage Current 1.5mA max @ 240VAC Remote ON/OFF Designated as REMO on the CN3, requires a low signal to inhibit output. Hiccup mode. OUTPUT SPECIFICATIONS Output Voltage See Table Output Power Range 200 Watts max. Output Adjustability Output user adjustable ±5% minimum. Total Regulation ±5% Output Current See Table Ripple & Noise (peak to peak) ±1% Transient Response Output voltage returns to within 1% in less than 500µs for a 50% dynamic load peak does not excess 5%. Hold-Up Time 20ms min. at 80% of full load. Overshoot Turn-on/off not exceed 5% over nominal voltage. Turn On Delay 1 second maximum at 120VAC. PROTECTION Over Voltage Protection Latching down will occur when output voltage exceeds 130% and recycle AC input to reset. Short Circuit Protection Trip without damage and auto-recovery. Over-Temperature Protection Protected in the event of excessive operating ambient 85°C and automatic recovery. Over-Power Protection Hiccup mode 110-140%; auto-recovery. Input Circuit Protection A protected 250V/5A fuse inserted. GENERAL SPECIFICATIONS Efficiency 75% minimum (Measuring at 230Vand full load). Withstand Voltage 1500 VAC input line to chassis (10mA DC cut off current, isolating 3000VAC primary to secondary windings. Primary to core 1500VAC. All for 3 seconds. Burn In 45 ±5°C for one hour @ 230VAC with full load. PFC Active power factor correction meets EN61000-3-2 class D. Power Good Designated as PG on the CN3 will go high 100-500ms after regulation and goes low 1ms before loss of regulation. Power Supply On Green LED designated as LED 1 on the PCB. Grounding Test Apply 25A from ground pin of the three-prong plug to the far most earth. Max allowable resistance 0.1 ohm. |
Similar Part No. - PSPRL9802D |
|
Similar Description - PSPRL9802D |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |