MANUFACTURER

CATEGORY

SERIES

PACKAGE

VOLTAGE

CLASS

REV

ECLIPTEK CORP.

OSCILLATOR

E32D1

CERAMIC

3.3V

OS3Y

01/09

OSCILLATOR

E32D1

ELECTRICAL SPECIFICATIONS

800-ECLIPTEK www.ecliptek.com for latest revision

Specifications subject to change without notice.

• RoHS Compliant (Pb-Free)

• PECL Output Oscillators

• 3.3V supply voltage

• Ceramic 6-pad SMD Package

• Stability to ±25ppm

• Tri-State Output

• Complementary Output

• Available on Tape and Reel

H

2.0

L

7.0

W

5.0

0°C to 70°C

-40°C to 85°C

-55°C to 125°C

3.3V

100mA Maximum

±50ppm or ±25ppm Maximum

V

V

1.5 nSeconds Maximum

50 ±10(%)

50 ±5(%)

50 Ohms into V

1.65V

0.0V

±75ppm Minimum

20%, 15%, or 10% Maximum

Positive Transfer Characteristic

10kHz Minimum

50kOhms Typical

-55dBc/Hz

-90dBc/Hz

-120dBc/Hz

-140dBc/Hz

-145dBc/Hz

-148dBc/Hz

Tri-State Enable Low / Complementary Output

Disables Outputs: High Impedance

Enables Output

Enables Output

0.4pSec Typical, 1pSec Maximum

4pSec Typical, 5pSec Maximum

3pSec Typical, 5pSec Maximum

3pSec Typical, 5pSec Maximum

4pSec Typical, 10pSec Maximum

27pSec Typical, 40pSec Maximum

10 mSeconds Maximum

Frequency Range (MHz)

Operating Temperature Range

Storage Temperature Range

Supply Voltage (V

Input Current

Frequency Tolerance / Stability

Output Voltage Logic High (V

Output Voltage Logic Low (V

Rise Time / Fall Time

Duty Cycle

Load Drive Capability

Control Voltage (V

Control Voltage Range (V

Frequency Deviation

Linearity

Transfer Function

Modulation Bandwidth (MBW)

Input Impedance (Z

Typical Phase Noise (Fo = 155.520MHz)

Logic Control/Additional Output

Tri-State Input Voltage

RMS Phase Jitter

Accumulated Period Jitter (t

Period Jitter (t

Period Jitter (t

Period Jitter (t

Period Jitter (t

Start Up Time

With Load

Inclusive of all conditions: Calibration Tolerance at 25°C,

Frequency Stability over the Operating Temperature

Range, Supply Voltage Change, Output Load Change, 1st

Year Aging, Shock, and Vibration

20% to 80% of waveform

at 50% of waveform

Test Conditions for Frequency Deviation

Inclusive of Operating Temperature Range, Supply

Voltage Change, and Output Load Change

Measured at -3dB with Contol Voltage of +1.65V

DC

at 10Hz Offset

at 100Hz Offset

at 1kHz Offset

at 10kHz Offset

at 100kHz Offset

at 1MHz Offset

V

No Connection

V

FJ = 12kHz to 20MHz

Sigma of Total Jitter Distribution

Sigma of Random Jitter

Sigma of Total Jitter Distribution

Deterministic Jitter

Peak to Peak of Jitter Distribution

50, 51.84, 52, 52.08, 54, 57.1429, 61.44, 63.36, 65.536, 76.8, 77.76, 100, 104, 106.25, 125,

126.72, 128, 153.6, 155.52, 156.25, 159.375, 161.1328, 166.6286, 167.3315, 184.32, 186.666MHz