Electronic Components Datasheet Search |
|
ISO3086DWR Datasheet(PDF) 2 Page - Texas Instruments |
|
|
ISO3086DWR Datasheet(HTML) 2 Page - Texas Instruments |
2 / 18 page ABSOLUTE MAXIMUM RATINGS (1) RECOMMENDED OPERATING CONDITIONS SUPPLY CURRENT ISO3080, ISO3086 ISO3082, ISO3088 SLOS581A – MAY 2008 – REVISED JUNE 2008 ............................................................................................................................................................... www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. VALUE UNIT VCC Input supply voltage, (2) VCC1, VCC2 –0.3 to 6 V VO Voltage at any bus I/O terminal –9 to 14 V VIT Voltage input, transient pulse, A, B, Y, and Z (through 100 Ω, see Figure 11) –50 to 50 V VI Voltage input at any D, DE or RE terminal –0.5 to 7 V IO Receiver output current ±10 mA Bus pins and GND1 ±6 JEDEC Standard 22, Human Body Model Bus pins and GND2 ±16 kV Test Method A114-C.01 All pins ±4 Electrostatic ESD discharge JEDEC Standard 22, Charged Device ±1 kV Model Test Method C101 All pins Machine Model ANSI/ESDS5.2-1996 ±200 V TJ Maximum junction temperature 150 °C (1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltage values except differential I/O bus voltages are with respect to network ground terminal and are peak voltage values MIN TYP MAX UNIT VCC1 Logic-side supply voltage (1) 3.15 5.5 V VCC2 Bus-side supply voltage(1) 4.5 5 5.5 V VOC Voltage at either bus I/O terminal A, B –7 12 V VIH High-level input voltage 2 VCC D, DE, RE V VIL Low-level input voltage 0 0.8 VID Differential input voltage A with respect to B –12 12 V RL Differential input resistance 54 60 Ω Driver –60 60 IO Output current mA Receiver –8 8 TJ Operating junction temperature –40 85 °C (1) For 5-V operation, VCC1 or VCC2 is specified from 4.5 V to 5.5 V. For 3-V operation, VCC1 or VCC2 is specified from 3.15 V to 3.6V. over recommended operating condition (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT RE at 0 V or VCC, DE at 0 V or VCC1 3.3-V VCC1 8 ICC1 Logic-side supply current mA RE at 0 V or VCC, DE at 0 V or VCC1 5-V VCC1 10 ICC2 Bus-side supply current RE at 0 V or VCC, DE at 0 V, No load 15 mA 2 Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s): ISO3080, ISO3086 ISO3082, ISO3088 |
Similar Part No. - ISO3086DWR |
|
Similar Description - ISO3086DWR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |