VS-705 Single Frequency VCSO

Vectron International, 267 Lowell Road, Hudson, NH 03051

Tel: 1-88-VECTRON-1

Page 6 of 9

Rev: 23Oct2008

25

217

200

150

260

Time (sec)

Reliability

VI qualification includes aging at various extreme temperatures, shock and vibration, temperature cycling, and

IR reflow simulation. The VS-705 family is capable of meeting the following qualification tests:

Environmental Compliance

Parameter

Conditions

Mechanical Shock

MIL-STD-883, Method 2002

Mechanical Vibration

MIL-STD-883, Method 2007

Solderability

MIL-STD-883, Method 2003

Gross and Fine Leak

MIL-STD-883, Method 1014

Resistance to Solvents

MIL-STD-883, Method 2016

Moisture Sensitivity Level

IPC/JEDEC J-STD-020, MSL1

Handling Precautions

Although ESD protection circuitry has been designed into the VS-705 proper precautions should be taken when

handling and mounting. VI employs a human body model (HBM) and a charged-device model (CDM) for ESD

susceptibility testing and design protection evaluation.

ESD Ratings

Model

Minimum

Conditions

Human Body Model

2000 V

MIL-STD 883, Method 3015

Charged Device Model

1000 V

JEDEC, JESD22-C101

Machine Model

200 V

JEDEC, JESD22-A115-A

Reflow Profile (IPC/JEDEC J-STD-020)

Parameter

Symbol

Value

PreHeat Time

60 sec Min, 180 sec Max

Ramp Up

3

Time Above 217

60 sec Min, 150 sec Max

Time To Peak Temperature

480 sec Max

Time At 260

20 sec Min, 40 sec Max

Ramp Down

6

The device has been qualified to meet the JEDEC

standard for Pb-Free assembly. The temperatures

and time intervals listed are based on the Pb-Free

small body requirements. The temperatures refer to

the topside of the package, measured on the package

body surface. The VS-705 device is hermetically

sealed so an aqueous wash is not an issue.

Terminal Plating: Electroless Ni > 1.90

μm

Electroless Au > 1.50

μm