LPC2210_08 datasheet(9/50 Pages) NXP

Part #	LPC2210

Description	16/32-bit ARM microcontrollers; flashless, with 10-bit ADC and external memory interface

Download	50 Pages

Scroll/Zoom	100%

Manufacturer	NXP [NXP Semiconductors]

Direct Link	http://www.nxp.com

Logo

9 / 50 page

LPC2210_2220_6

Product data sheet

Rev. 06 — 11 December 2008

9 of 50

NXP Semiconductors

LPC2210/2220

16/32-bit ARM microcontrollers

P0.13/DTR1/

MAT1.1

85[1]

H10[1]

O

DTR1 — Data Terminal Ready output for UART1.

O

MAT1.1 — Match output for Timer 1, channel 1.

P0.14/DCD1/

EINT1

92[2]

G10[2]

I

DCD1 — Data Carrier Detect input for UART1.

I

EINT1 — External interrupt 1 input.

Note: LOW on this pin while RESET is LOW forces on-chip

bootloader to take over control of the part after reset.

P0.15/RI1/

EINT2

99[2]

E11[2]

I

RI1 — Ring Indicator input for UART1.

I

EINT2 — External interrupt 2 input.

P0.16/EINT0/

MAT0.2/CAP0.2

100[2]

E10[2]

I

EINT0 — External interrupt 0 input.

O

MAT0.2 — Match output for Timer 0, channel 2.

I

CAP0.2 — Capture input for Timer 0, channel 2.

P0.17/CAP1.2/

SCK1/MAT1.2

101[1]

D13[1]

I

CAP1.2 — Capture input for Timer 1, channel 2.

I/O

SCK1 — Serial Clock for SPI1/SSI/Microwire.

SPI/SSI/Microwire clock output from master or input to slave.

O

MAT1.2 — Match output for Timer 1, channel 2.

P0.18/CAP1.3/

MISO1/MAT1.3

121[1]

D8[1]

I

CAP1.3 — Capture input for Timer 1, channel 3.

I/O

MISO1 — Master In Slave Out for SPI1. Data input to SPI

master or data output from SPI slave.

O

MAT1.3 — Match output for Timer 1, channel 3.

P0.19/MAT1.2/

MOSI1/CAP1.2

122[1]

C8[1]

O

MAT1.2 — Match output for Timer 1, channel 2.

I/O

MOSI1 — Master Out Slave In for SPI1. Data output from SPI

master or data input to SPI slave.

• SPI interface: MOSI line.

• SSI: DX/RX line (SPI1 as a master/slave).

• Microwire: SO/SI line (SPI1 as a master/slave).

I

CAP1.2 — Capture input for Timer 1, channel 2.

P0.20/MAT1.3/

SSEL1/ EINT3

123[2]

B8[2]

O

MAT1.3 — Match output for Timer 1, channel 3.

I

SSEL1 — Slave Select for SPI1/Microwire. Used to select the

SPI or Microwire interface as a slave. Frame synchronization

in case of 4-wire SSI.

I

EINT3 — External interrupt 3 input.

P0.21/PWM5/

CAP1.3

4[1]

C1[1]

O

PWM5 — Pulse Width Modulator output 5.

I

CAP1.3 — Capture input for Timer 1, channel 3.

P0.22/CAP0.0/

MAT0.0

5[1]

D4[1]

I

CAP0.0 — Capture input for Timer 0, channel 0.

O

MAT0.0 — Match output for Timer 0, channel 0.

P0.23

6[1]

D3[1]

I/O

General purpose bidirectional digital port only.

P0.24

8[1]

D1[1]

I/O

General purpose bidirectional digital port only.

P0.25

21[1]

H1[1]

I/O

General purpose bidirectional digital port only.

P0.27/AIN0/

CAP0.1/MAT0.1

23[4]

H3[4]

I

AIN0 — ADC, input 0. This analog input is always connected

to its pin.

I

CAP0.1 — Capture input for Timer 0, channel 1.

O

MAT0.1 — Match output for Timer 0, channel 1.

Table 4.

Pin description …continued

Symbol

Pin (LQFP)

Pin (TFBGA) Type

Description

Similar Part No. - LPC2210_08

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	LPC2210FBD144	181Kb / 39P	16/32-bit ARM microcontroller with 10-bit ADC and external memory interface Rev. 01-09 February 2004
	LPC2210FBD144	255Kb / 49P	16/32-bit ARM microcontrollers; flashless with 64 kB, with 10-bit ADC and external memory interface Rev. 02-30 May 2005
	LPC2210	273Kb / 50P	16/32-bit ARM microcontrollers; flashless, with 10-bit ADC and external memory interface Rev. 06-11 December 2008

More results

Similar Description - LPC2210_08

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	LPC2210	273Kb / 50P	16/32-bit ARM microcontrollers; flashless, with 10-bit ADC and external memory interface Rev. 06-11 December 2008
	LPC2220	255Kb / 49P	16/32-bit ARM microcontrollers; flashless with 64 kB, with 10-bit ADC and external memory interface Rev. 02-30 May 2005
	LPC2210	253Kb / 49P	16/32-bit ARM microcontrollers; flashless with 64 kB,with 10-bit ADC and external memory interface Rev. 04-2 October 2007
	LPC2290	185Kb / 41P	16/32-bit ARM microcontrollers with CAN, 10-bit ADC and external memory interface Rev. 01-09 February 2004
	LPC2210	181Kb / 39P	16/32-bit ARM microcontroller with 10-bit ADC and external memory interface Rev. 01-09 February 2004
	LPC2290	210Kb / 41P	16/32-bit ARM microcontroller with CAN, 10-bit ADC and external memory interface Rev. 03-16 November 2006
	LPC2290	210Kb / 41P	16/32-bit ARM microcontroller with CAN, 10-bit ADC and external memory interface Rev. 03-16 November 2006
	LPC2212	208Kb / 45P	16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC and external memory interface Rev. 04-3 January 2008
	LPC2292	273Kb / 54P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 06-10 December 2007
	LPC2292	456Kb / 54P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 8-8 June 2011

More results

LPC2210 Datasheet(PDF) 9 Page - NXP Semiconductors

LPC2210 Datasheet(HTML) 9 Page - NXP Semiconductors

Similar Part No. - LPC2210_08

Similar Description - LPC2210_08

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Datasheet Download

Link URL