HEDS-56XX datasheet(9/12 Pages) AVAGO

Part #	HEDS-56XX

Description	Quick Assembly Two and Three Channel Optical Encoders

Download	12 Pages

Scroll/Zoom	100%

Manufacturer	AVAGO [AVAGO TECHNOLOGIES LIMITED]

Direct Link	http://www.avagotech.com

Logo

9 / 12 page

9

Encoder Mounting and Assembly

1a. For HEDS-5500 and 5600: Mount encoder base plate

onto motor. Tighten screws. Go on to step 2.

1b. For HEDS-5540, 5640 and HEDM-5500, 5600, 5540 :

Slip alignment tool onto motor shaft. With alignment

tool in place, mount encoder baseplate onto motor

as shown above. Tighten screws. Remove alignment

tool.

1c. It is recommended that adhesive* is applied to the

screw-baseplate interface to prevent screw loosening

due to effect of high temperature on plastic

2. Snap encoder body onto base plate locking all 4

snaps.

a. Push the hex wrench into the body of the encoder to

ensure that it is properly seated into the code wheel

hub set screws. Then apply a downward force on the

end of the hex wrench. This sets the code wheel gap

by levering the code wheel hub to its upper position.

b. While continuing to apply a downward force, rotate

the hex wrench in the clockwise direction until the

hub set screw is tight against the motor shaft (The

recommended torque to tighten the setscrew is 15-

18 ozf.inch). The hub set screw attaches the code

wheel to the motor’s shaft.

c. Remove the hex wrench by pulling it straight out of

the encoder body.

4. Use the center screwdriver slot, or either of the two

side slots, to rotate the encoder cap dot clockwise

from the one dot position to the two dot position. Do

not rotate the encoder cap counterclockwise beyond

the one dot position.

The encoder is ready for use!

Similar Part No. - HEDS-56XX

Manufacturer	Part #	Datasheet	Description
Agilent(Hewlett-Packard...	HEDS-5600	263Kb / 15P	Quick Assembly Two and Three Channel Optical Encoders
AVAGO TECHNOLOGIES LIMI...	HEDS-5600	232Kb / 14P	Quick Assembly Two and Three Channel Optical Encoders
	HEDS-5600	316Kb / 13P	Quick Assembly Two and Three Channel Optical Encoders
	HEDS-5600	310Kb / 13P	Quick Assembly Two and Three Channel Optical Encoders
	HEDS-5600	310Kb / 13P	Quick Assembly Two and Three Channel Optical Encoders

More results

Similar Description - HEDS-56XX

Manufacturer	Part #	Datasheet	Description
AVAGO TECHNOLOGIES LIMI...	HEDS-5500A06	310Kb / 13P	Quick Assembly Two and Three Channel Optical Encoders
	HEDM-5500-B14	310Kb / 13P	Quick Assembly Two and Three Channel Optical Encoders
	HEDS-5500-A14	316Kb / 13P	Quick Assembly Two and Three Channel Optical Encoders
	HEDS-5645I13	310Kb / 13P	Quick Assembly Two and Three Channel Optical Encoders
Agilent(Hewlett-Packard...	HEDS5540	263Kb / 15P	Quick Assembly Two and Three Channel Optical Encoders
AVAGO TECHNOLOGIES LIMI...	HEDM-550X	232Kb / 14P	Quick Assembly Two and Three Channel Optical Encoders
	AEDM-5XXX	351Kb / 9P	Quick Assembly High Resolution Three Channel Optical Encoders
	HEDR-5XXX	313Kb / 6P	Three Channel Quick Assembly Encoders
	HEDC-55XX	460Kb / 10P	Two or Three Channel Quick Assembly Encoders With Connector Latch
	AEDL-5XXX	321Kb / 8P	Quick Assembly High Resolution Three Channel Optical Encoders with Differential Output

More results

HEDS-56XX Datasheet(PDF) 9 Page - AVAGO TECHNOLOGIES LIMITED

HEDS-56XX Datasheet(HTML) 9 Page - AVAGO TECHNOLOGIES LIMITED

Similar Part No. - HEDS-56XX

Similar Description - HEDS-56XX

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL