Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate

the performance, characteristics, and functions of the described products in the independent state, and are not

guarantees of the performance, characteristics, and functions of the described products as mounted in the

customer

device, the customer should always evaluate and test devices mounted in the customer

equipment.

Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to

"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,

communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be

intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace

instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety

equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case

of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee

thereof. If you should intend to use our products for applications outside the standard applications of our

customer who is considering such use and/or outside the scope of our intended standard applications, please

consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our

customer shall be solely responsible for the use.

N2608 MS / 80107 MS PC B8-9208 No.A0907-1/6

LV8013T

Overview

LV8013T is a 1ch forward/reverse motor driver IC using D-MOS FET for output stage. As MOS circuit is used, it supports

the PWM input. Its features are that the on resistance (0.3

Ω typ) and current dissipation are low.

It also provides protection functions such as heat protection circuit and reduced voltage detection and is optimal for the

motors that need high-current.

Functions

• 1ch forward/reverse motor driver

• Possible to respond to 3V control voltage and 6V motor voltage device

• Low power consumption

• Low-temperature resistance 0.5Ω

• Built-in charge pump circuit

• Built-in low voltage reset and thermal shutdown circuit

• Four mode function forward/reverse, brake, stop.

Specifications

Maximum Ratings at Ta = 25

°C, SGND = PGND = 0V

Parameter

Symbol

Conditions

Ratings

Unit

Supply voltage (For load)

VM max

-0.5 to 16

V

Supply voltage (For control)

VCC max

-0.5 to 6.0

V

IO max

DC

1.2

A

IO peak1

t

≤ 100ms, f = 5Hz

2.0

A

Output current

IO peak2

t

≤ 10ms, f = 5Hz

3.8

A

Input voltage

VIN max

-0.5 to VCC+0.5

V

Allowable power dissipation

Pd max

Mounted on a specified board *

800

mW

Operating temperature

Topr

-20 to +75

°C

Storage temperature

Tstg

-55 to +150

°C

*Specified board : 30mm

× 50mm × 1.6mm, glass epoxy board.

Bi-CMOS IC

Forward/Reverse Motor Driver

Ordering number : ENA0907A