A good quality low ESR capacitor placed as close as

practicable across the load will give the best ripple and noise

performance.

To reduce output ripple, it is recommended to use 3.3uF

capacitors at the output.

Thermal Considerations

Many conditions affect the thermal performance of the

power module, such as orientation, airflow over the module

and board spacing. To avoid exceeding the maximum

temperature rating of the components inside the power

module, the case temperature must be kept below 90°C.

The derating curves are determined from measurements

obtained in an experimental apparatus.

MSKW2000 Series

REV:5 2008/10

MINMAX

7

+Out

-Out

+Vin

-Vin

Load

DC Power

Source

+

-

Cout

Single Output

DC / DC

Converter

+Out

-Out

+Vin

-Vin

Load

DC Power

Source

+

-

Cout

Com.

Dual Output

DC / DC

Converter

DUT

Position of air velocity

probe and thermocouple

50mm / 2in

Air Flow

15mm / 0.6in